Search results
Results from the WOW.Com Content Network
Polyester is a category of polymers that contain one or two ester linkages in every repeat unit of their main chain. [1] As a specific material, it most commonly refers to a type called polyethylene terephthalate (PET). Polyesters include naturally occurring chemicals, such as in plants and insects, as well as synthetics such as polybutyrate.
UV-cured powder will melt in 60 to 120 seconds when reaching a temperature 110 °C and 130 °C. Once the melted coating is in this temperature window, it is instantly cured when exposed to UV light. [13] The most common polymers used are polyester, polyurethane, polyester-epoxy (known as hybrid), straight epoxy (fusion bonded epoxy) and acrylics.
The heat setting process takes place at temperatures between 110 °C and 200 °C in a steam-air-mix. After heat setting, the yarn is cooled and wound onto packages again at the winder. In general a heat setting machine consists of six lines at eight ends (fibers) each. A daily production of up to 10.5 tons is possible.
Paint adhesion testing. In the paint and coating industries, paint adhesion testing is often used to determine if the paint or coating will adhere properly to the substrates to which they are applied. Several tests measure the resistance of paints and coatings from substrates: cross-cut test, scrape adhesion, pull-off test, and others.
If drying is done in pans or trays, put the resin in layers no more than 2 to 3 inches (5 to 8 cm) deep in drying trays. Dry for 24 hours at 250 °F, or 16 hours at 300 °F, or 8 hours at 350 °F. If drying at 350 °F (177 °C), limit drying time to 16 hours. For the injection molding press, a desiccant hopper dryer is recommended.
Polyester resin. Polyester resins are synthetic resins formed by the reaction of dibasic organic acids and polyhydric alcohols. Maleic anhydride is a commonly used raw material with diacid functionality in unsaturated polyester resins. [1] Unsaturated polyester resins are used in sheet moulding compound, bulk moulding compound and the toner of ...
Common applications include conversion to polyester fibers and plasticizers, aviation gasoline, rubber cements, automotive enamels, paints and lacquers, and various other commercial uses. 19. Nitro fuel, chemically represented as CH₃NO₂, has a flash point of 95 degrees F (35 degrees C) and an ignition temperature of 784 degrees F (418 ...
Fusion bonded epoxy coating, also known as fusion-bond epoxy powder coating and commonly referred to as FBE coating, is an epoxy -based powder coating that is widely used to protect steel pipe used in pipeline construction from corrosion. It is also commonly used to protect reinforcing bars (though being phased out as of 2005 [1]) and on a wide ...