Search results
Results from the WOW.Com Content Network
English: Very simplified diagram: sound level in a reverberant cavity excited by a pulse, as a function of time. RT60 is the reverberation time. The small variations (small vertical peaks) of the pressure along the lines are not shown.
The most appropriate reverberation time depends on the use of the room. RT60 is a measure of reverberation time. [9] Times about 1.5 to 2 seconds are needed for opera theaters and concert halls. For broadcasting and recording studios and conference rooms, values under one second are frequently used. The recommended reverberation time is always ...
Reverberation time is a measure of the time required for the sound to "fade away" in an enclosed area after the source of the sound has stopped. When it comes to accurately measuring reverberation time with a meter, the term T 60 [ 6 ] (an abbreviation for reverberation time 60 dB) is used.
Speech Transmission Index (STI) is a measure of speech transmission quality. The absolute measurement of speech intelligibility is a complex science. The STI measures some physical characteristics of a transmission channel (a room, electro-acoustic equipment, telephone line, etc.), and expresses the ability of the channel to carry across the characteristics of a speech signal.
A perfectly diffusive sound space is one in which the reverberation time is the same at any listening position. Most interior spaces are non-diffusive; the reverberation time is considerably different around the room. At low frequencies, they suffer from prominent resonances called room modes.
Dereverberation of audio (speech or music) is a corresponding function to blind deconvolution of images, although the techniques used are usually very different. Reverberation itself is caused by sound reflections in a room (or other enclosed space) and is quantified by the room reverberation time and the direct-to-reverberant ratio. The effect ...
While wow is perceived clearly as pitch variation, flutter can alter the sound of the music differently, making it sound ‘cracked’ or ‘ugly’. A recorded 1 kHz tone with a small amount of flutter (around 0.1%) can sound fine in a ‘dead’ listening room, but in a reverberant room constant fluctuations will often be clearly heard.
A reverberation chamber is used to test the sound absorption coefficients and NRC of a material. The noise reduction coefficient (commonly abbreviated NRC) is a single number value ranging from 0.0 to 1.0 that describes the average sound absorption performance of a material. An NRC of 0.0 indicates the object does not attenuate mid-frequency ...