Search results
Results from the WOW.Com Content Network
Low Temperature – freeze paintings placed inside a sealed plastic bag at a temperature of -20 °F (-29 °C) for 4 hours. Overexposure to fluctuations in Relative Humidity and temperature should be monitored when managing pests to prevent damage to the painting.
Temperature measuring and controlling module for microcontroller experiment. Temperature control is a process in which change of temperature of a space (and objects collectively there within), or of a substance, is measured or otherwise detected, and the passage of heat energy into or out of the space or substance is adjusted to achieve a desired temperature.
The temperature of the preservative in the hot bath should be between 60 to 110 °C (140 to 230 °F) and 30 to 40 °C (86 to 104 °F) in the cold bath (depending on preservative and tree species). The average penetration depths achieved with this process ranges from 30 to 50 mm (1.2 to 2.0 in).
The actual temperature in a drying kiln is the dry-bulb temperature (usually denoted by Tg), which is the temperature of a vapour-gas mixture determined by inserting a thermometer with a dry bulb. On the other hand, the wet-bulb temperature (TW) is defined as the temperature reached by a small amount of liquid evaporating in a large amount of ...
Once the wood surface is prepared and stained, the finish is applied. It usually consists of several coats of wax, shellac, drying oil, lacquer, varnish, or paint, and each coat is typically followed by sanding. Finally, the surface may be polished or buffed using steel wool, pumice, rotten stone or other materials, depending on the shine ...
A temperature of 40 °C (104 °F) is achieved at the centre of masonry and timbers and maintained for twenty-four hours. However, the question could be asked as to why someone should expend large amounts of energy heating the entire building to a high temperature when all that is needed to kill the rot is to dry it out.
The first of the cooling load factors used in this method is the CLTD, or the Cooling Load Temperature Difference. This factor is used to represent the temperature difference between indoor and outdoor air with the inclusion of the heating effects of solar radiation. [1] [5] The second factor is the CLF, or the cooling load factor.
Three of the processes are performed in one step, using oil (oil-heat treatment), nitrogen (Reti wood) and steam (Le-Bois Perdure). [1] The Thermo wood process consists of drying, heat treatment and finally cooling/conditioning, and takes up to 72 hours. [4]