Ad
related to: standing seam solar clamps for concrete walls and columns exterior
Search results
Results from the WOW.Com Content Network
Pole mounts, which are driven directly into the ground or embedded in concrete. Foundation mounts, such as concrete slabs or poured footings; Ballasted footing mounts, such as concrete or steel bases that use weight to secure the solar module system in position and do not require ground penetration. This type of mounting system is well suited ...
Solar roof tiles are roof tiles with integrated solar modules. The ceramic solar roof tile is developed and patented by a Dutch company [12] in 2013. Modules shaped like multiple roof tiles. Solar shingles are modules designed to look and act like regular shingles, while incorporating a flexible thin film cell.
In a thermal storage wall system, often called a Trombe wall, a massive wall is located directly behind south-facing glass, which absorbs solar energy and releases it selectively towards the building interior at night. The wall can be constructed of cast-in-place concrete, brick, adobe, stone, or solid (or filled) concrete masonry units.
However, the Trombe walls can be the load-bearing structure of the buildings, so each floor's equator-facing facade can take the advantage of the Trombe wall system. Compared to other passive solar systems, using the Trombe walls in commercial buildings with significant internal loads (people and electronic equipment) is useful because of the ...
An unglazed design is used for heating or preheating large volumes of fresh air, and a partially glazed 2-stage heater is available for achieving higher temperatures when heating buildings in colder climates. The SolarWall technology can also be installed as a hybrid solar system that generates both heat and electricity from the same surface area.
A load-bearing wall or bearing wall is a wall that is an active structural element of a building — that is, it bears the weight of the elements above said wall, resting upon it by conducting its weight to a foundation structure. [1] The materials most often used to construct load-bearing walls in large buildings are concrete, block, or brick.
A hold-down may also refer to clamping device used to anchor a pipe to a structural steel element or concrete floor or allow movement of the pipe in an axial direction. [1] At the bottom, the hold down is connected to the concrete foundation or structural slab by an embedded or epoxied anchor bolt. At the top, the hold down is connected to a ...
When selecting an anchor, consider the element formwork and the ease of placement and securing of the anchor prior and during the pouring of the concrete. For example, some of the anchors shown in figures 4-6, can be placed into thin wall elements as the anchor chair maintains the position relative to the element thickness.
Ad
related to: standing seam solar clamps for concrete walls and columns exterior