Search results
Results from the WOW.Com Content Network
In the United States, the standard "city" dial tone was a 600 Hz tone that was amplitude-modulated at 120 Hz. [3] Some dial tones were simply adapted from 60 Hz AC line current. In the UK, the standard Post Office dialing tone was 33 Hz; it was generated by a motor-driven ringing machine in most exchanges and by a vibrating-reed generator in ...
Tone cadence Dial tone A: 425 Hz: continuous Dial tone B: 425 Hz, amplitude modulated by 25 Hz: continuous Dial tone C: 400 Hz + 425 Hz + 450 Hz: continuous Dial tone D: 400 Hz + 425 Hz: continuous Dial tone E: 413 Hz + 438 Hz: continuous Ringback tone A: 425 Hz, amplitude modulated by 25 Hz: 0.4 s on, 0.2 s off, 0.4 s on, 2 s off Ringback tone ...
Autovon keypads were one of the few production units to include all 16 DTMF signals. The red keys in the fourth column produce the A, B, C, and D DTMF events. Before the development of DTMF, telephone numbers were dialed by users with a loop-disconnect (LD) signaling, more commonly known as pulse dialing (dial pulse, DP) in the United States.
Low tone, also busy tone, is defined as having frequency components of 480 and 620 Hz at a level of −24 dBm and a cadence of one half second ON and one half second OFF. Reorder tone, also often called fast busy tone, is the same tone, but with a cadence of 0.25 of a second ON and 0.25 of a second OFF. The original plan had two slightly ...
A dial tone (dialling tone in the UK) is a telephony signal sent by a telephone exchange or private branch exchange (PBX) to a terminating device, such as a telephone, when an off-hook condition is detected. It indicates that the exchange is working and is ready to initiate a telephone call. The tone stops when the first dialed digit is recognized.
A dial tone (dialling tone in the UK) is a telephony signal sent by a telephone exchange or private branch exchange (PBX) to a terminating device, such as a telephone, when an off-hook condition is detected. It indicates that the exchange is working and is ready to initiate a telephone call. The tone stops when the first dialed digit is recognized.
Multifrequency signaling is a technological precursor of dual-tone multi-frequency signaling (DTMF, Touch-Tone), which uses the same fundamental principle, but was used primarily for signaling address information and control signals from a user's telephone to the wire-center's Class-5 switch. DTMF uses a total of eight frequencies.
In EU countries and those following ETSI (European Telecommunication Standards Institute) recommendations, the cadence is the same as North America, i.e. 0.25 seconds on / 0.25 seconds off, but with a 425 Hz tone. The UK reorder tone uses a 400 Hz tone with a cadence of 0.4 seconds on, 0.35 seconds off, 0.225 seconds on, 0.525 seconds off.