Ad
related to: egr cooler bypass
Search results
Results from the WOW.Com Content Network
The goal of EGR is thus to reduce NO x production by reducing the combustion temperatures. In modern diesel engines, the EGR gas is usually cooled with a heat exchanger to allow the introduction of a greater mass of recirculated gas. However, uncooled EGR designs do exist; these are often referred to as hot-gas recirculation (HGR).
Still using a revised variable geometry turbocharger, it also features an EGR cooler to lower NO X, with a bypass valve to avoid increasing hydrocarbon emissions before the engine reaches operating temperature, and a cylinder head optimized per Nissan's MK (Modulated Kinetics) combustion method. [4] Applications. 1998–2001 Nissan Presage
This causes excessive buildup in the cooler matrix, and when the engine warms up these solid chunks of buildup can detach from the EGR cooler and get sucked into the plastic intake tube, melting holes in the intake tube, causing a massive boost leak and in very rare cases an engine fire. BMW has issued a recall to over 1.6 million vehicles in ...
An internal wastegate is a built-in bypass valve and passage within the turbocharger housing which allows excess exhaust pressure to bypass the turbine into the downstream exhaust. Control of the internal wastegate valve by a pressure signal from the intake manifold is identical to that of an external wastegate.
The hot exhaust would be mixed with cooler bypass air to improve thermodynamic efficiency, before being expelled through the rear nozzle. [1] Other fuels considered promising, due to their ability to generate flammable vapours, included bituminous coal , or pine wood heat-soaked in oil or paraffin.
The bypass ratio (BPR) of a turbofan engine is the ratio between the mass flow rate of the bypass stream to the mass flow rate entering the core. [1] A 10:1 bypass ratio, for example, means that 10 kg of air passes through the bypass duct for every 1 kg of air passing through the core.
A blowoff valve (also called dump valve or compressor bypass valve) is a pressure release system present in most petrol turbocharged engines. Blowoff valves are used to reduce pressure in the intake system as the throttle is closed, thus preventing compressor surge .
Bosch CP3 high-pressure pump is used driven by the timing belt. Max rail pressure is 1350bar. Watercooled return line fuel cooler with an additional cooling pump (runs all the time) and side-mounted radiator and air-cooled return line cooler mounted on the bottom of the car. six-hole solenoid injection nozzles, CR electronic injection control.
Ad
related to: egr cooler bypass