Ads
related to: 2 channel vs 4 ram sticks
Search results
Results from the WOW.Com Content Network
Dual-channel memory slots, color-coded orange and yellow for this particular motherboard. Dual-channel-enabled memory controllers in a PC system architecture use two 64-bit data channels. Dual-channel should not be confused with double data rate (DDR), in which data exchange happens twice per DRAM clock. The two technologies are independent of ...
DDR4 RAM operates at a voltage of 1.2 V and supports frequencies between 800 and 1600 MHz (DDR4-1600 through DDR4-3200). Compared to DDR3, which operates at 1.5 V with frequencies from 400 to 1067 MHz (DDR3-800 through DDR3-2133), DDR4 offers better performance and energy efficiency .
For a 64-bit-wide memory data interface, this equates to having 4 ranks, where each rank can be selected by a 2-bit chip select signal. Memory controllers such as the Intel 945 Chipset list the configurations they support: "256-Mib, 512-Mib, and 1-Gib DDR2 technologies for ×8 and ×16 devices", "four ranks for all DDR2 devices up to 512-Mibit ...
The DDR4 SDRAM is a high-speed dynamic random-access memory internally configured as 16 banks, 4 bank groups with 4 banks for each bank group for ×4/×8 and 8 banks, 2 bank groups with 4 banks for each bank group for ×16 DRAM. The DDR4 SDRAM uses an 8n prefetch architecture to achieve high-speed operation.
In computing, a memory module or RAM stick is a printed circuit board on which memory integrated circuits are mounted. [1] Memory modules permit easy installation and replacement in electronic systems, especially computers such as personal computers, workstations, and servers. The first memory modules were proprietary designs that were specific ...
Also, each module has eight RAM chips, but the lower one has an unoccupied space for the ninth chip; this space is occupied in ECC DIMMs. Three SDRAM DIMM slots on a ABIT BP6 computer motherboard. A DIMM ( Dual In-line Memory Module ) is a popular type of memory module used in computers.
Earlier DIMM generations featured only a single channel and one CA (Command/Address) bus controlling the whole memory module with its 64 (for non-ECC) or 72 (for ECC) data lines. Both subchannels on a DDR5 DIMM each have their own CA bus, controlling 32 bits for non-ECC memory and either 36 or 40 data lines for ECC memory, resulting in a total ...
The highest-rated DDR2 modules in 2009 operate at 533 MHz (1066 MT/s), compared to the highest-rated DDR modules operating at 200 MHz (400 MT/s). At the same time, the CAS latency of 11.2 ns = 6 / (bus clock rate) for the best PC2-8500 modules is comparable to that of 10 ns = 4 / (bus clock rate) for the best PC-3200 modules.
Ads
related to: 2 channel vs 4 ram sticks