enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Tumble finishing - Wikipedia

   en.wikipedia.org/wiki/Tumble_finishing

   This is followed by washing and then a stage of finer grits (120-220 then 400-600 mesh), before the (optional) use of a pre-polishing compound (1200 grit), a washing cycle with detergent to remove any grit on the stones. The final step is a polishing stage using powdered polish, (such as cerium oxide or tin oxide), water, and often small ...

3. Rotten stone - Wikipedia

   en.wikipedia.org/wiki/Rotten_stone

   It is usually mixed with oil, sometimes water, and rubbed on the surface of varnished or lacquered wood with a felt pad or cloth. Rotten stone is sometimes used to buff stains out of wood. Some polishing waxes contain powdered rotten stone in a paste substrate. For larger polishing jobs, rotten stone mixed with a binder is applied to polishing ...

4. Surface finishing - Wikipedia

   en.wikipedia.org/wiki/Surface_finishing

   A #4 architectural finish is characterized by fine polishing grit lines that are uniform and directional in appearance. It is produced by polishing the metal with a 120–180 grit belt or wheel finish and then softened with an 80–120 grit greaseless compound or a medium non woven abrasive belt or pad. #4 Dairy or sanitary finish

5. Burnishing (pottery) - Wikipedia

   en.wikipedia.org/wiki/Burnishing_(pottery)

   Burnishing is a form of pottery treatment in which the surface of the pot is polished, using a hard smooth surface such as a wooden or bone spatula, smooth stones, plastic, or even glass bulbs, while it still is in a leathery 'green' state, i.e., before firing.

6. Polishing (metalworking) - Wikipedia

   en.wikipedia.org/wiki/Polishing_(metalworking)

   Polishing is often used to enhance the appearance of an item, prevent contamination of instruments, remove oxidation, create a reflective surface, or prevent corrosion in pipes. In metallography and metallurgy, polishing is used to create a flat, defect-free surface for examination of a metal's microstructure under a microscope. Silicon-based ...

7. Sharpening stone - Wikipedia

   en.wikipedia.org/wiki/Sharpening_stone

   Artificial stones usually come in the form of a bonded abrasive composed of a ceramic such as silicon carbide (carborundum); aluminium oxide (corundum, also known as water stone or India stone); and CBN (cubic boron nitride). They provide more aggressive cutting action than natural stones, and are used for the middle stages of knife sharpening ...