enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Lumber - Wikipedia

   en.wikipedia.org/wiki/Lumber

   For example, splitting a 10-foot-long (3.0 m) 2×4 (1 + 1 ⁄ 2 by 3 + 1 ⁄ 2 in or 38 by 89 mm) into two 1×4s (3 ⁄ 4 by 3 + 1 ⁄ 2 in or 19 by 89 mm) of the same length is considered re-sawing. Plastic lumber

3. Board foot - Wikipedia

   en.wikipedia.org/wiki/Board_foot

   An example of planed lumber is softwood "two by four" lumber sold by large lumber retailers, nominally 2 by 4 inches (50 mm × 100 mm). The 2 × 4 is actually only 1 + 1 ⁄ 2 in × 3 + 1 ⁄ 2 in (38 mm × 89 mm), but the dimensions for the lumber when purchased wholesale could still be represented as full 2 × 4 lumber, although the "standard ...

4. Plank (wood) - Wikipedia

   en.wikipedia.org/wiki/Plank_(wood)

   The wood is categorized as a board if its width is less than 2 + 1 ⁄ 2 in (64 mm), and its thickness is less than 1 + 1 ⁄ 2 in (38 mm). A plank used in a building as a horizontal supporting member that runs between foundations, walls, or beams to support a ceiling or floor is called a joist.

5. Framing (construction) - Wikipedia

   en.wikipedia.org/wiki/Framing_(construction)

   Studs usually consist of 1 + 1 ⁄ 2-by-3 + 1 ⁄ 2-inch (38 mm × 89 mm) or 1 + 1 ⁄ 2-by-5 + 1 ⁄ 2-inch (38 mm × 140 mm) lumber and are commonly spaced at 16 inches (410 mm) on center. This spacing may be changed to 12 or 24 inches (300 or 610 mm) on center depending on the load and the limitations imposed by the type and thickness of the ...

6. History of the lumber industry in the United States - Wikipedia

   en.wikipedia.org/wiki/History_of_the_lumber...

   In 1950, the United States produced 38 billion board feet of lumber, and that number remained fairly constant throughout the decades moving forward, with the national production at 32.9 billion board feet in 1960 and 34.7 billion board feet in 1970.

7. Cross-laminated timber - Wikipedia

   en.wikipedia.org/wiki/Cross-laminated_timber

   Cross-laminated timber (CLT) is a subcategory of engineered wood [1] panel product made from gluing together at least three layers [2] of solid-sawn lumber (i.e. lumber cut from a single log). [3] Each layer of boards is usually oriented perpendicular to adjacent layers and glued on the wide faces of each board, usually in a symmetric way so ...