Search results
Results from the WOW.Com Content Network
[44] [45] It may be made by diluting household bleach as appropriate (normally 1 part bleach to 9 parts water). [46] Such solutions have been demonstrated to inactivate both C. difficile [44] and HPV. [47] "Weak chlorine solution" is a 0.05% solution of hypochlorite used for washing hands, but is normally prepared with calcium hypochlorite ...
Sodium hypochlorite (NaClO), usually as a 3–6% solution in water, usually called "liquid bleach" or just "bleach". Historically called "Javel water" (French: eau de Javel). It is used in many households to whiten laundry, disinfect hard surfaces in kitchens and bathrooms, treat water for drinking, and keep swimming pools free of infectious ...
The "dilution factor" is an expression which describes the ratio of the aliquot volume to the final volume. Dilution factor is a notation often used in commercial assays. For example, in solution with a 1/5 dilution factor (which may be abbreviated as x5 dilution ), entails combining 1 unit volume of solute (the material to be diluted) with ...
Mixing a hypochlorite bleach with an acid can liberate chlorine gas. Chlorine is a respiratory irritant that attacks mucous membranes and burns the skin. As little as 3.53 ppm can be detected as an odor, and 1000 ppm is likely to be fatal after a few deep breaths.
Percent active chlorine is a unit of concentration used for hypochlorite-based bleaches.One gram of a 100% active chlorine bleach has the quantitative bleaching capacity as one gram of free chlorine. [1]
To pre-soak, add a couple tablespoons of the powder to a large bucket or bathtub with every gallon of water and let sit for at least 30 minutes. The item has a 4.8-star average rating from 44,415 ...
The hypochlorite can be in the form of a powder or a liquid such as chlorine bleach (solution of sodium hypochlorite or calcium hypochlorite in water). Water that is being shock chlorinated should not be swum in or drunk until the sodium hypochlorite count in the water goes down to three parts per million (ppm) or until the calcium hypochlorite ...
Mixing of liquids occurs frequently in process engineering. The nature of liquids to blend determines the equipment used. Single-phase blending tends to involve low-shear, high-flow mixers to cause liquid engulfment, while multi-phase mixing generally requires the use of high-shear, low-flow mixers to create droplets of one liquid in laminar, turbulent or transitional flow regimes, depending ...