Search results
Results from the WOW.Com Content Network
A parallelogram steering linkage is called such because like its namesake, the two sides of the linkage run parallel to each other and are equal in distance. This type of steering linkage uses four tie rods, one inner and one outer on each side (left and right) that are connected by an adjustment sleeve, a center link (which runs between the tie rods), an idler arm on the passenger side, and a ...
The Ackermann steering geometry is a geometric arrangement of linkages in the steering of a car or other vehicle designed to solve the problem of wheels on the inside and outside of a turn needing to trace out circles of different radii. It was invented by the German carriage builder Georg Lankensperger in Munich in 1816, then patented by his ...
A steering linkage is the part of an automotive steering system that connects to the front wheels. [1] The steering linkage which connects the steering gearbox to the front wheels consists of a number of rods. These rods are connected with a socket arrangement similar to a ball joint, called a tie rod end, allowing the linkage to move back and ...
Four-bar linkage. In the study of mechanisms, a four-bar linkage, also called a four-bar, is the simplest closed- chain movable linkage. It consists of four bodies, called bars or links, connected in a loop by four joints. Generally, the joints are configured so the links move in parallel planes, and the assembly is called a planar four-bar ...
This requires the inside front wheel to be turned further by the steering mechanism than the outside front. If the track rod is behind the axle, this is achieved by the steering arms from each hub pointing inwards to the rear, i.e. this is not a parallelogram. It's possible that some careless reference is made to this as a "parallelogram linkage".
Dual-pivot steering geometry (also known as virtual pivot) is a geometric arrangement of linkages in the steering of a car designed to reduce or eliminate scrub radius by moving the pivot point of the king pin outboard, in order to improve steering precision and straight line stability. [1][2] It is typically used with a MacPherson strut, but ...
One of the links is the ground or base. [1] This configuration is also called a pantograph, [2] [3] however, it is not to be confused with the parallelogram-copying linkage pantograph. The linkage can be a one-degree-of-freedom mechanism if two gears are attached to two links and are meshed together, forming a geared five-bar mechanism. [1]
A mechanical linkage is an assembly of systems connected so as to manage forces and movement. The movement of a body, or link, is studied using geometry so the link is considered to be rigid. [1] The connections between links are modeled as providing ideal movement, pure rotation or sliding for example, and are called joints.