Search results
Results from the WOW.Com Content Network
This is important for newer tape media, which have very thin, dense data tracks; 256, 384 and 768 data tracks on a 1 ⁄ 2-inch-wide (13 mm) tape are available. DLT7000 and 8000 tilt the head forward and backward to reduce crosstalk between adjacent tracks through azimuth ; this is called Symmetric Phase Recording .
The first commonly available increase in tape length resulted from a reduction in backing thickness from 1.5 to 1.0 mil (38 to 25 μm) resulting in a total thickness reduction from 42 to 35 μm (1.7 to 1.4 mils), which allowed 3,600 ft (1,100 m), 1,800 ft (550 m), and 900 ft (270 m) tapes to fit on ten-and-a-half-, seven-, and five-inch reels respectively.
In 1989 JVC increased the run time to 30 minutes by using thinner tape. [3] Later, JVC offered 45-minute and 60-minute cassettes. For comparison, 120-minute 8-mm cassettes became available in the late 1985 and quickly became the norm. Later, 150-minute and 180-minute 8-mm cassettes were offered as well.
Tape is enclosed into videocassette of four different sizes: small, medium, large and extra-large. All DV cassettes use 1 ⁄ 4 inch (6.4 mm) wide tape. DV on magnetic tape uses helical scan, which wraps the tape around a tilted, rotating head drum with video heads mounted to it. As the drum rotates, the heads read the tape diagonally.
During the early 1950s, Ampex began marketing one- and two-track machines using 1 ⁄ 4-inch (6.4 mm) tape. In May 1953 the firm announced production of two- and three-track machines on 1/4 inch tape. [11] The line soon expanded into three- and four-track models using 1 ⁄ 2-inch (13 mm) tape. In the early 1950s, Ampex moved to Redwood City ...
For high fidelity recordings, reel-to-reel audio tape recording typically works at tape speeds of 15 or 7.5 inches-per-second (38 or 19 cm/s), but this requires a lot of tape for a given amount of recording. Lower fidelity recordings can be made at 3.75 or even 1.875 ips, which allows more recording time on a given tape, but at the cost of ...
A compression fitting 15 mm isolating valve. A compression fitting is a fitting used in plumbing and electrical conduit systems to join two tubes or thin-walled pipes together. . In instances where two pipes made of dissimilar materials are to be joined (most commonly PVC and copper), the fittings will be made of one or more compatible materials appropriate for the connect
Digital Audio Tape (DAT or R-DAT) is a signal recording and playback medium developed by Sony and introduced in 1987. [1] In appearance it is similar to a Compact Cassette, using 3.81 mm / 0.15" (commonly referred to as 4 mm) magnetic tape enclosed in a protective shell, but is roughly half the size at 73 mm × 54 mm × 10.5 mm.