Search results
Results from the WOW.Com Content Network
For example, one inch measured from a drawing with a scale of "one-inch-to-the-foot" is equivalent to one foot in the real world (a scale of 1:12)....one inch measured from a drawing with a scale of "two-inches-to-the-foot" is equivalent to six inches in the real world (a scale of 1:6). It is not to be confused with a true unitless ratio.
A scale proposed by some European manufacturers (e.g. Wiking) to supersede HO scale. 1:87.1: 3.5 mm: Model railways (HO/h0) Exact HO scale (half O of 7 mm = 1 foot) 1:87: 3.503 mm: Model railways (HO/h0) Civilian and military vehicles. Often used to describe HO scale. Original nominal 25 mm figure scale; though a 6-foot human in 1:87 is closer ...
When H0 scale was being introduced, the motors available were too large [4] to fit in scale-sized bodies and so as a compromise the scale was increased from 3.5 mm to 4 mm to the foot, but the gauge was not changed so other elements could be shared. For 00 therefore the track is about 12.5% narrower than it should be for the scale used.
Narrow-gauge models in this gauge can be as large as 1:3 scale. 5-inch Live steam: 1:12: 127 mm or 121 mm Ridable, outdoor gauge. The gauge is 5 in (127 mm) in Europe, but 4 + 3 ⁄ 4 in (121 mm) in US and Canada. For standard gauge prototypes at 5 inch, the correct scale is 1 1 ⁄ 16 inch per foot or approximately 1:11.3. Alternatively 1.1/8 ...
One of the most common is 1 inch represents 5 feet. This specifies an exact scale of 1:60. That implies that a 28 mm tall figurine represents a 1.68 m (5 ft 6 in) person – which is a reasonable number for a modern 50th percentile male (See: Human height). Another popular scale is 1/72 or 1 inch equals 6 foot which uses 20 mm, to 25 mm miniatures.
The British version continued the pattern of sub-contracting to Germans, so, at 7 mm to the foot, it works out to a scale of 1:43.5. Later, the European authority of model railroad firms MOROP declared that the "O" gauge (still 32 mm) must use the scale of 1:45, to allow wheel, tire, and splasher clearance for smaller than realistic curved ...
Under the Harappan linear measures, Indus cities during the Bronze Age used a foot of 13.2 inches (335 mm) and a cubit of 20.8 inches (528 mm). [11] The Egyptian equivalent of the foot—a measure of four palms or 16 digits—was known as the djeser and has been reconstructed as about 30 cm (11.8 in).
1:285 scale vehicles and 1:300 infantry from Heroics & Ros. 1:285 scale or 6 mm figure size is a US Army scale introduced in the late 1960s, and used for wargames and some scale model dioramas. It is used in miniature wargaming to depict large battles in a relatively small gaming area. [1] 1:300 scale (5 mm scale) is an almost identical NATO ...