Search results
Results from the WOW.Com Content Network
En-route charts are divided into high and low versions, with information on airways and navaids for high- and low-altitude flight, respectively. The division between low altitude and high altitude is usually defined as the altitude that marks transition to flight levels (in the United States , this is taken to be 18,000 feet MSL by convention).
Pilots are also required to ensure their planned route does not contravene the minimum flying altitude regulations contained in CAR 167. This restriction is normally 1000FT above populated or built-up areas and 500FT elsewhere. Procedures are different when flights are conducted under IFR, where LSALT is commonly used.
In aviation, instrument flight rules (IFR) is one of two sets of regulations governing all aspects of civil aviation aircraft operations; the other is visual flight rules (VFR). The U.S. Federal Aviation Administration 's (FAA) Instrument Flying Handbook defines IFR as: "Rules and regulations established by the FAA to govern flight under ...
An approach plate for the ILS or LOC approach to runway 14L at Cologne Bonn Airport, Germany.. Approach plates (or, more formally, instrument approach procedure charts) are the printed or digital charts of instrument approach procedures that pilots use to fly instrument approaches during instrument flight rules (IFR) operations.
This instrument flight rules chart shows low-altitude airways in the Oakland Area Control Center (near San Francisco, California). In the United States, airways [1] or air routes are defined by the Federal Aviation Administration (FAA) in two ways: "VOR Federal airways and Low/Medium Frequency (L/MF) (Colored) Federal airways" [2]
The rule affected only those aircraft operating under IFR when in level flight above 3,000 ft above mean sea level, or above the appropriate transition altitude, whichever is the higher, and when below FL195 (19,500 ft above the 1013.2 hPa datum in the UK, or with the altimeter set according to the system published by the competent authority in ...
An aeronautical chart is a map designed to assist in the navigation of aircraft, much as nautical charts do for watercraft, or a roadmap does for drivers. Using these charts and other tools, pilots are able to determine their position, safe altitude, best route to a destination, navigation aids along the way, alternative landing areas in case of an in-flight emergency, and other useful ...
Under FAR 61.57, to be eligible to fly in Instrument Meteorological Conditions (IMC) an IFR-rated pilot must accomplish and log at least the following IFR procedures under actual or simulated IMC every 6 months: 6 instrument approaches. Holding procedures. Intercepting and tracking courses through the use of navigation systems.