Search results
Results from the WOW.Com Content Network
The focal point F and focal length f of a positive (convex) lens, a negative (concave) lens, a concave mirror, and a convex mirror. The focal length of an optical system is a measure of how strongly the system converges or diverges light; it is the inverse of the system's optical power.
A 100 mm focal length f /4 lens has an entrance pupil diameter of 25 mm. A 100 mm focal length f /2 lens has an entrance pupil diameter of 50 mm. Since the area is proportional to the square of the pupil diameter, [6] the amount of light admitted by the f /2 lens is four times that of the f /4 lens.
35 mm equivalent focal lengths are calculated by multiplying the actual focal length of the lens by the crop factor of the sensor. Typical crop factors are 1.26× – 1.29× for Canon (1.35× for Sigma "H") APS-H format, 1.5× for Nikon APS-C ("DX") format (also used by Sony, Pentax, Fuji, Samsung and others), 1.6× for Canon APS-C format, 2× for Micro Four Thirds format, 2.7× for 1-inch ...
Instead, the angular aperture of a lens (or an imaging mirror) is expressed by the f-number, written f /N, where N is the f-number given by the ratio of the focal length f to the diameter of the entrance pupil D: =. This ratio is related to the image-space numerical aperture when the lens is focused at infinity. [3]
f = lens focal length; x 1 = object length; x 2 = image length; r 1 = incident curvature radius; r 2 = refracted curvature radius
Diagram illustrating the flange focal length of an SLR–type and a mirrorless–type camera. For an interchangeable lens camera, the flange focal distance (FFD) (also known as the flange-to-film distance, flange focal depth, flange back distance (FBD), flange focal length (FFL), back focus [1] or register, depending on the usage and source) of a lens mount system is the distance from the ...
A 50 mm lens on an APS-C format (crop factor 1.6) images a slightly smaller field of view than a 70 mm lens on a 35 mm camera. The terms crop factor and focal length multiplier were coined to help 35 mm film format SLR photographers understand how their existing ranges of lenses would perform on newly introduced DSLR cameras which had sensors smaller than the 35 mm film format, but often ...
The original application called for placing the chart at a distance 26 times the focal length of the imaging lens used. The bars above and to the left are in sequence, separated by approximately the square root of two (12, 17, 24, etc.), while the bars below and to the left have the same separation but a different starting point (14, 20, 28, etc.)