enow.com Web Search

Search results

  1. Results from the WOW.Com Content Network
  2. Parallel port - Wikipedia

    en.wikipedia.org/wiki/Parallel_port

    Mini-Centronics 36-pin male connector (top) with Micro ribbon 36-pin male Centronics connector (bottom) The Apple II Parallel Printer Port connected to the printer via a folded ribbon cable; one end connected to the connector at the top of the card, and the other end had a 36-pin Centronics connector.

  3. Serial port - Wikipedia

    en.wikipedia.org/wiki/Serial_port

    A male D-subminiature connector used for an RS-232 serial port on an IBM PC compatible computer along with the serial port symbol. A serial port is a serial communication interface through which information transfers in or out sequentially one bit at a time. [1]

  4. D-subminiature (professional audio) - Wikipedia

    en.wikipedia.org/wiki/D-subminiature...

    The most common usage is the DB25, using TASCAM's pinout (now standardised in AES59 by the Audio Engineering Society [1]). To avoid the possibility of bent pins on fixed equipment, the male connector is generally fitted to the cabling and the female connector to the equipment.

  5. RS-232 - Wikipedia

    en.wikipedia.org/wiki/RS-232

    Male pinout of a 25-pin serial port (D-subminiature, DB-25) commonly found on 1980s computers. The following table lists commonly used RS-232 signals (called "circuits" in the specifications) and their pin assignments on the recommended DB-25 connectors [14] (see Serial port pinouts for other commonly used connectors not defined by the standard).

  6. File:25 Pin D-sub pinout.svg - Wikipedia

    en.wikipedia.org/wiki/File:25_Pin_D-sub_pinout.svg

    Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.

  7. EIA-530 - Wikipedia

    en.wikipedia.org/wiki/EIA-530

    Currently known as TIA-530-A, but often called EIA-530, or RS-530, is a balanced serial interface standard that generally uses a 25-pin connector, originally created by the Telecommunications Industry Association. Finalized in 1987 (revision A finalized in 1992 [1]), the specification defines the cable between the DTE and DCE devices.

  8. D-subminiature - Wikipedia

    en.wikipedia.org/wiki/D-subminiature

    For example, DB-25 denotes a D-sub with a 25-position shell size and a 25-position contact configuration. The contacts in each row of these connectors are spaced 326/3000 of an inch apart, or approximately 0.1087 inches (2.76 mm), and the rows are spaced 0.112 inches (2.84 mm) apart; the pins in the two rows are offset by half the distance ...

  9. Data Carrier Detect - Wikipedia

    en.wikipedia.org/wiki/Data_Carrier_Detect

    The serial DCD pin can be used to accurately detect a PPS signal, as described in RFC 2783: [1] One convenient means to provide a PPS signal to a computer system is to connect that signal to a modem-control pin on a serial-line interface to the computer. The Data Carrier Detect (DCD) pin is frequently used for this purpose.