Search results
Results from the WOW.Com Content Network
On a cello, the strings are attached to the tailpiece and are held above the soundboard by the bridge.. A bridge is a device that supports the strings on a stringed musical instrument and transmits the vibration of those strings to another structural component of the instrument—typically a soundboard, such as the top of a guitar or violin—which transfers the sound to the surrounding air.
In addition to the G, D, A, and E strings of a standard violin, a five-string violin typically includes a lower C string. [1] Violins with 6 or more strings may add a low F, low B♭, low E♭, or a soprano violin high A (sometimes a high B). [citation needed] The five-string violin was created to combine the pitch ranges of the violin and viola.
A violin consists of a body or corpus, a neck, a finger board, a bridge, a soundpost, four strings, and various fittings.The fittings are the tuning pegs, tailpiece and tailgut, endpin, possibly one or more fine tuners on the tailpiece, and in the modern style of playing, usually a chinrest, either attached with the cup directly over the tailpiece or to the left of it.
HP Pro 3305 [25] AMD 785G AMD Phenom II, Athlon 2, Sempron Socket FM1 ATI Radeon HD 4200 DDR3, 4 16 GB SFF, MT HP Pro 3400 [26] Intel H61 Intel 2nd gen. (Sandy Bridge) Core 'i' LGA 1155 Intel HD 2000/3000 No GPU slot DDR3, 2 16 GB MT HP Pro 3405 [26] AMD A55 AMD A series (Llano) Socket FM1 AMD Radeon HD 6xx0D No GPU slot DDR3, 2 16 GB MT HP Pro ...
One end is pierced for the string; the other is squared off to fit in a tuning lever socket. The middle section, which would pass through the wood, is tapered. A variety of methods are used to tune different stringed instruments. Most change the pitch produced when the string is played by adjusting the tension of the strings.
The outer contour of a new violin, one of the more important aspects of the instrument, is designed by the violin maker, and in the 2020s, the outlines of the old masters' violins are usually used. Different methods of violin making include using an inside mould, an outside mould, or building "on the back" without a mould.
The sound post is the piece marked 5. In a string instrument, the sound post or soundpost is a dowel inside the instrument under the treble end of the bridge, spanning the space between the top and back plates and held in place by friction. It serves as a structural support for an archtop instrument, transfers sound from the top plate to the ...
Acoustic violins may be used with an add-on piezoelectric bridge or body pickup, or a magnetic pickup attached to the fingerboard end. Alternatively, an electrodynamic pickup can be installed under an acoustic violin's fingerboard avoiding interference with any tone-producing parts of the violin, and therefore keeping its acoustic resonances and tone intact.