Search results
Results from the WOW.Com Content Network
US spelling: square kilometer: 1.0 km 2 (0.39 sq mi) km2 sqmi; square metre: m2 m 2: US spelling: square meter: 1.0 m 2 (11 sq ft) m2 sqft; square centimetre: cm2 cm 2: US spelling: square centimeter: 1.0 cm 2 (0.16 sq in) cm2 sqin; square millimetre: mm2 mm 2: US spelling: square millimeter: 1.0 mm 2 (0.0016 sq in) mm2 sqin; non-SI metric ...
Measurements are in millimeters then inches, i.e. mm (in). Pistol cartridges ... 39.6 (1.560) 12.00 (.4728) 11.96 [1] (.4709) ... 6.5-06 A-Square: 6.70 (.264) 63.3 (2 ...
Converts measurements to other units. Template parameters [Edit template data] This template prefers inline formatting of parameters. Parameter Description Type Status Value 1 The value to convert. Number required From unit 2 The unit for the provided value. Suggested values km2 m2 cm2 mm2 ha sqmi acre sqyd sqft sqin km m cm mm mi yd ft in kg g mg lb oz m/s km/h mph K C F m3 cm3 mm3 L mL cuft ...
SD g/mm 2 is the sectional density in grams per square millimeters; m g is the mass of the projectile in grams; d mm is the diameter of the projectile in millimeters; For example, a small arms bullet with a mass of 10.4 grams (160 gr) and having a diameter of 6.70 mm (0.264 in) has a sectional density of: 4 · 10.4 / (π·6.7 2) = 0.295 g/mm 2
There were two ⌀3.2 mm negative pins spaced 9.5 mm apart and two ⌀4.0 mm positive pins spaced 14.3 mm apart. Negative and positive pins were spaced 18.1 mm apart. It was used in some early transistor radio amplifiers with a Class B output stage, allowing the loud speaker to be connected between the amplifier output and the battery center tap.
Cross-sectional area of a mechanical pencil lead (0.5-0.7 mm in diameter) [16] 10 −6: 1 square millimetre (mm 2) 1–2 mm 2: Area of a human fovea [17] 2 mm 2: Area of the head of a pin: 10 −5 30–50 mm 2: Area of a 6–8 mm hole punched in a piece of paper by a hole punch [18] 10 −4: 1 square centimetre (cm 2) 290 mm 2: Area of one side ...
The codes given in the chart below usually tell the length and width of the components in tenths of millimeters or hundredths of inches. For example, a metric 2520 component is 2.5 mm by 2.0 mm which corresponds roughly to 0.10 inches by 0.08 inches (hence, imperial size is 1008).
Distance between lands is .450-inch (11.4 mm) and between grooves is .458-inch (11.6 mm). Recommended rifling twist rate for this cartridge is 1-14 in. Since Lott was an influential big-game hunter and writer the cartridge gained some attention with professional hunters in Africa.