Ad
related to: 2 x 4 lumber dimensions width and depth chart
Search results
Results from the WOW.Com Content Network
Common sizes include 2×4 (pictured) (also two-by-four and other variants, such as four-by-two in Australia, New Zealand, and the UK), 2×6, and 4×4. The length of a board is usually specified separately from the width and depth. It is thus possible to find 2×4s that are four, eight, and twelve feet in length.
Typical dimensions of today's "two by four" is 1.5 by 3.5 inches (38 mm × 89 mm) dimensional lumber prior to sanding and are typically placed 16 inches (406 mm) from each other's center, but sometimes also at 12 inches (305 mm) or 24 inches (610 mm).
The beams are continuously formed, so the length of the beam is limited only to the maximum length that can be handled and transported. Typical widths are 3 + 1 ⁄ 2, 5 + 1 ⁄ 4 or 7 inches (89, 133 or 178 mm); typical depths are 9 + 1 ⁄ 2, 11 + 7 ⁄ 8, 14, 16 and 18 inches (240, 300, 360, 410 and 460 mm). Typically the beams are made to a ...
A "3 ⁄ 4-inch pipe" in the Nominal Pipe Size system has no dimensions that are exactly 0.75 inches. A screw thread has a number of dimensions required to assure proper function but is referred to by a nominal size and a thread design family, for example "1 ⁄ 4 inch, 20 threads per inch, Unified National Coarse."
Studs usually consist of 1 + 1 ⁄ 2-by-3 + 1 ⁄ 2-inch (38 mm × 89 mm) or 1 + 1 ⁄ 2-by-5 + 1 ⁄ 2-inch (38 mm × 140 mm) lumber and are commonly spaced at 16 inches (410 mm) on center. This spacing may be changed to 12 or 24 inches (300 or 610 mm) on center depending on the load and the limitations imposed by the type and thickness of the ...
The timber would be typically called battens (7 inches wide), deals (above 7, usually 9 inches wide) and planks (11 inches wide); boards were under 2 inches thick. [3] [4] The standard hundred of the Russian capital of Saint Petersburg was 120 boards which were 12 feet long, 1 1 ⁄ 2 inches thick and 11 inches wide – a volume of 165 cubic ...
In the United States, planks can be any length and are generally a minimum of 2×8 (1 + 1 ⁄ 2 in × 7 + 1 ⁄ 4 in or 38 mm × 184 mm), but planks that are 2×10 (1 + 1 ⁄ 2 in × 9 + 1 ⁄ 4 in or 38 mm × 235 mm) and 2×12 (1 + 1 ⁄ 2 in × 11 + 1 ⁄ 4 in or 38 mm × 286 mm) are more commonly stocked by lumber retailers.
An example of planed lumber is softwood "two by four" lumber sold by large lumber retailers, nominally 2 by 4 inches (50 mm × 100 mm). The 2 × 4 is actually only 1 + 1 ⁄ 2 in × 3 + 1 ⁄ 2 in (38 mm × 89 mm), but the dimensions for the lumber when purchased wholesale could still be represented as full 2 × 4 lumber, although the "standard ...
Ad
related to: 2 x 4 lumber dimensions width and depth chart