Search results
Results from the WOW.Com Content Network
The Camera Serial Interface (CSI) is a specification of the Mobile Industry Processor Interface (MIPI) Alliance. It defines an interface between a camera and a host processor. The latest active interface specifications are CSI-2 v4.1 (April 2024), CSI-3 v1.1 (March 2014) and CCS v1.1.1 (April 2023).
The camera interface's parallel interface consists of the following lines: 8 to 12 bits parallel data line These are parallel data lines that carry pixel data. The data transmitted on these lines change with every Pixel Clock (PCLK). Horizontal Sync (HSYNC) This is a special signal that goes from the camera sensor or ISP to the camera interface ...
Serial interfaces have a number of advantages over parallel SCSI, including higher data rates, simplified cabling, longer reach, improved fault isolation and full-duplex capability. The primary reason for the shift to serial interfaces is the clock skew issue of high-speed parallel interfaces, which makes the faster variants of parallel SCSI ...
CSI-3: 3rd generation MIPI Camera Serial Interface features a scalable high bandwidth interface, a guaranteed data transmission and a command set for basic component initialization and configuration. GBT: MIPI Gigabit Trace. A network independent protocol for transporting trace data over high-speed interfaces such as UniPort-M or USB3.0.
A GMSL serializer receives video from a standard digital video interface such as HDMI, DisplayPort, Camera Serial Interface (CSI-2) or Display Serial Interface (DSI) over a cable up to 15 meter in length. [4] The data is received by a deserializer that outputs it on another standard digital video interface.
In computing, Serial Attached SCSI (SAS) is a point-to-point serial protocol that moves data to and from computer-storage devices such as hard disk drives, solid-state drives and tape drives. SAS replaces the older Parallel SCSI (Parallel Small Computer System Interface, usually pronounced "scuzzy" [ 3 ] [ 4 ] ) bus technology that first ...
The original SCSI standard, SCSI-1, was derived from the Shugart Associates System Interface (SASI) and formally adopted in 1986 by ANSI. SCSI-1 features an 8-bit parallel bus (with parity ), running asynchronously at 3.5 MB/s, or 5 MB/s in synchronous mode, and a maximum bus cable length of 6 metres (20 ft), significantly longer than the 18 ...
The QPI is an element of a system architecture that Intel calls the QuickPath architecture that implements what Intel calls QuickPath technology. [12] In its simplest form on a single-processor motherboard, a single QPI is used to connect the processor to the IO Hub (e.g., to connect an Intel Core i7 to an X58). In more complex instances of the ...