Search results
Results from the WOW.Com Content Network
Briggs & Stratton needed to solve this problem, so, following discussions with several Japanese engine manufacturers, it entered into an agreement with Mitsubishi Heavy Industries Ltd. of Tokyo, Japan. Briggs & Stratton produced only certain parts for the engines, while Mitsubishi was responsible for overall production and shipping.
The engine is a V-twin four-stroke, 895 cc (54.6 cu in) or 993 cc (60.6 cu in) displacement, fan-driven air-cooled, gasoline engine design. The larger displacement is achieved by increasing the stroke from 78 to 87 mm (3.1 to 3.4 in), but using the same bore of 86 mm (3.4 in).
The Briggs & Stratton BlockZilla motor is a more advanced form of the earlier Raptor motor. The block is built up to handle more power. This means that the block is about 6 lb (2.7 kg) heavier and has much more structural integrity. Also the exhaust and intake ports are set on an angle.
Power outages are categorized into three different phenomena, relating to the duration and effect of the outage: A transient fault is a loss of power typically caused by a fault on a power line, e.g. a short circuit or flashover. Power is automatically restored once the fault is cleared. A brownout is a drop in voltage in an electrical power ...
The G13BB uses a wasted spark arrangement of two coils bolted directly to the valve cover. This engine uses a MAF sensor to monitor manifold pressure, similar to the G16B series. This engine has a non-interference valvetrain design. It uses the same G series block found in many other Suzuki models and so it is a popular conversion into the ...
A combined cycle power plant is an assembly of heat engines that work in tandem from the same source of heat, converting it into mechanical energy. On land, when used to make electricity the most common type is called a combined cycle gas turbine ( CCGT ) plant, which is a kind of gas-fired power plant .
The G16E-GTS is a turbocharged engine model with 10.5:1 compression ratio and D-4ST direct/port injection system with multi-oil jet piston cooling, large-diameter exhaust valves and a part-machined intake port. The turbo boost is set between 1.4 and 1.81 bar (20.3 and 26.3 psi).
The latest version was used in the Mitsubishi Eclipse GT and Galant. Output in 2004 was 210 hp (157 kW; 213 PS) at 5500 rpm with 278 N⋅m (205 lbf⋅ft) of torque at 4000 rpm. In the older version, used in many Chrysler models since 1987, this V6 was an SOHC 12-valve developing 141 hp (105 kW; 143 PS) at 5000 rpm and 172 lb⋅ft (233 N⋅m) of ...