Search results
Results from the WOW.Com Content Network
A solenoid control valve assembly integrated into the engine valley cover contains solenoid valves that provide a pressurized oil signal to specially designed hydraulic roller lifters provided by Eaton Corp. and Delphi. These lifters disable and re-enable exhaust and intake valve operation to deactivate and reactivate engine cylinders . Unlike ...
This system consists of an electrically driven water pump and a 3-way rotary valve which allows the engine to maintain proper operating temperatures and quicker warm-ups. Also, a continuously variable oil pump helps to lower parasitic losses and provide proper lubrication and cooling to the engine, especially under high-load conditions. [ 1 ]
A control valve is a valve used to control fluid flow by varying the size of the flow passage as directed by a signal from a controller. [1] This enables the direct control of flow rate and the consequential control of process quantities such as pressure , temperature , and liquid level.
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.
Ordinary valves can have many ports and fluid paths. A 2-way valve, for example, has 2 ports; if the valve is open, then the two ports are connected and fluid may flow between the ports; if the valve is closed, then ports are isolated. If the valve is open when the solenoid is not energized, then the valve is termed normally open (N.O.).
The hydraulic actuators respond to changes of pressure or flow and will open/close the valve. Automatic control valves do not require an external power source, meaning that the fluid pressure is enough to open and close them. Flow control valves, a type of automatic control valve, regulate fluid flow by maintaining a predetermined flow rate ...
The two-valve arrangement is retained, though the titanium intake valves by Del West have grown to 2.2 in (56 mm) and sodium-filled exhaust valves are up to 1.61 in (41 mm). Peak output is 505 bhp (512 PS; 377 kW) at 6300 rpm (72.0 BHP/L) and 470 lb⋅ft (637 N⋅m) of torque at 4800 rpm with a 7000 rpm redline. [68]
It came equipped with 1.84-inch (46.7 mm) intake valves and 1 + 1 ⁄ 2-inch (38.1 mm) exhaust valves. The 229 cu in (3.8 L) V6 was only equipped with a 2-barrel carburetor. For 1980, the 229 cu in (3.8 L) used a mechanical Dualjet. From 1981 to 1984, the electronic Dualjet was used along with the GM's CCC (Computer Command Control) system. The ...