Search results
Results from the WOW.Com Content Network
In computing, serial presence detect (SPD) is a standardized way to automatically access information about a memory module.Earlier 72-pin SIMMs included five pins that provided five bits of parallel presence detect (PPD) data, but the 168-pin DIMM standard changed to a serial presence detect to encode more information.
Compared to DDR2 memory, DDR3 memory uses less power. Some manufacturers further propose using "dual-gate" transistors to reduce leakage of current. [10]According to JEDEC, [11]: 111 1.575 volts should be considered the absolute maximum when memory stability is the foremost consideration, such as in servers or other mission-critical devices.
Version 3.2, published on July 23, 2013, raised the data rate to 533 MB/s. [15] Version 4.0, published on April 17, 2014, introduced the NV-DDR3 interface increases the maximum switching speed from 533 MB/s to 800 MB/s, providing a performance boost of up to 50% for high performance applications enabled by solid-state NAND storage components. [16]
Assorted SO-DIMM Modules A 200-pin PC2-5300 DDR2 SO-DIMM. A 204-pin PC3-10600 DDR3 SO-DIMM. A SO-DIMM slot on a computer motherboard. A SO-DIMM (pronounced "so-dimm" / ˈ s oʊ d ɪ m /, also spelled "SODIMM") or small outline DIMM, is a smaller alternative to a DIMM, being roughly half the physical size of a regular DIMM. The first SODIMMs had ...
DDR3 advances extended the ability to preserve internal clock rates while providing higher effective transfer rates by again doubling the prefetch depth. The DDR4 SDRAM is a high-speed dynamic random-access memory internally configured as 16 banks, 4 bank groups with 4 banks for each bank group for ×4/×8 and 8 banks, 2 bank groups with 4 ...
RDRAM memory with integrated heat spreader A Samsung RDRAM PC-600 128 MB A Samsung RDRAM Installed with Pentium 4 1.5 GHz. The first PC motherboards with support for RDRAM debuted in late 1999, after two major delays.
Although most registered memory modules also feature error-correcting code memory (ECC), it is also possible for registered memory modules to not be error-correcting or vice versa. Unregistered ECC memory is supported and used in workstation or entry-level server motherboards that do not support very large amounts of memory.
The standards specify memory module label formats for end-user markets. [11] For example: 1GB 2Rx4 PC2-3200P-333-11-D2 is a 1 GB DDR2 Registered DIMM, with address/command parity function, using 2 ranks of x4 SDRAMs operational to PC2-3200 performance with CAS Latency = 3, tRCD = 3, tRP = 3, using JEDEC SPD revision 1.1, raw card reference ...