Search results
Results from the WOW.Com Content Network
These are called the pump curves. They are determined by studies, whose methodology is standardized. These curves are specified when water is pumped with a density of 1000 kg/m3 and kinematic viscosity of 1 mm2/s. When the circulating pump is used for liquids of different density and viscosity, the pump curves have to be recalculated.
Reciprocating pump has wide application and to clear the basic idea it is necessary to know the basic parts. The basic parts along with its function; Water reservoir - it is not a part of reciprocating pump, however, it is the main source where from the reciprocating pump takes the water. It may be a source of other fluid as well.
Air lock problems often occur when one is trying to recommission a system after it has been deliberately (for servicing) or accidentally emptied. Take, for example, a central heating system using a circulating pump to pump water through radiators. When filling such a system, air is trapped in the radiators. This air has to be vented using screw ...
This is due to the electrical requirements of the pump forcing circulation and the amount of water being circulated through the tubes. [ 6 ] The additional parts required; steam drum, circulation pump, and orifices to limit flow, cause a forced circulation boiler to lead to increased cost as well as increased opportunities for failure which ...
This can occur around cylinders and spheres, for any fluid, cylinder size and fluid speed, provided that the flow has a Reynolds number in the range ~40 to ~1000. [ 1 ] In fluid dynamics , an eddy is the swirling of a fluid and the reverse current created when the fluid is in a turbulent flow regime. [ 2 ]
The fluid exerts a constant pressure on the surface once it has separated instead of a continually increasing pressure if still attached. [4] In aerodynamics , flow separation results in reduced lift and increased pressure drag , caused by the pressure differential between the front and rear surfaces of the object.
If a pump forces the liquid through a tube connected to a system consisting of a Venturi to increase the liquid speed (the diameter decreases), a short piece of tube with a small hole in it, and last a Venturi that decreases speed (so the pipe gets wider again), the gas will be sucked in through the small hole because of changes in pressure.
Air streams are mixed to save energy and improve energy efficiency by partially recirculating conditioned air.. The most common application for an air-mixing plenum is the mixing of return air (or extract air) with fresh air to provide a supply air mixture for onward distribution to the building or area which the ventilation system is serving. [1]