Search results
Results from the WOW.Com Content Network
[1] [2] In order to make mileposts consistent with the real mileage, every milepost beyond the equation would need to be moved. [3] For example, an equation of 7.6 back = 9.2 ahead means that the feature does not have any section between mile 7.6 and mile 9.2, and the distance between mileposts 7 and 10 is only 1.4 miles. This would usually be ...
So, for example, if a route is 20 kilometres (12 mi) with 1600 metres of climb (as is the case on leg 1 of the Bob Graham Round, Keswick to Threlkeld), the equivalent flat distance of this route is 20+(1.6×8)=32.8 kilometres (20.4 mi). Assuming an individual can maintain a speed on the flat of 5 km/h, the route will take 6 hours and 34 minutes.
In terms of partition, 20 / 5 means the size of each of 5 parts into which a set of size 20 is divided. For example, 20 apples divide into five groups of four apples, meaning that "twenty divided by five is equal to four". This is denoted as 20 / 5 = 4, or 20 / 5 = 4. [2] In the example, 20 is the dividend, 5 is the divisor, and 4 is ...
376.99 divided by 360° produces: 376.99/360 = 1.047 NM (off by 4.7%) This rule is therefore very good approximation. As a coincidence, 1 NM is about 6,000 feet (6,076.1 feet) so we can use the 60:1 rule for this too. For a 1 degree shift at 1 NM, there are about 100 feet of offset.
Different from instantaneous speed, average speed is defined as the total distance covered divided by the time interval. For example, if a distance of 80 kilometres is driven in 1 hour, the average speed is 80 kilometres per hour. Likewise, if 320 kilometres are travelled in 4 hours, the average speed is also 80 kilometres per hour.
In the division of 43 by 5, we have: 43 = 8 × 5 + 3, so 3 is the least positive remainder. We also have that: 43 = 9 × 5 − 2, and −2 is the least absolute remainder. These definitions are also valid if d is negative, for example, in the division of 43 by −5, 43 = (−8) × (−5) + 3, and 3 is the least positive remainder, while,
Long division is the standard algorithm used for pen-and-paper division of multi-digit numbers expressed in decimal notation. It shifts gradually from the left to the right end of the dividend, subtracting the largest possible multiple of the divisor (at the digit level) at each stage; the multiples then become the digits of the quotient, and the final difference is then the remainder.
If the last digit in the number is 0, then the result will be the remaining digits multiplied by 2. For example, the number 40 ends in a zero, so take the remaining digits (4) and multiply that by two (4 × 2 = 8). The result is the same as the result of 40 divided by 5(40/5 = 8).