enow.com Web Search

  1. Ads

    related to: 5.00x10 tyre conversion chart dimensions

Search results

  1. Results from the WOW.Com Content Network
  2. ISO 5775 - Wikipedia

    en.wikipedia.org/wiki/ISO_5775

    The inner width of the rim on which the tire is mounted should be about 65% of the tire's nominal section width for tires smaller than 30 mm and 55% for those larger. The section height of a tire is usually identical to its section width (for tires less than 28 mm, 2.5 mm have to be added to the width to get the height).

  3. Tire code - Wikipedia

    en.wikipedia.org/wiki/Tire_code

    Prior to 1964, tires were all made to a 90% aspect ratio. Tire size was specified as the tire width in inches and the diameter in inches – for example, 6.50-15. [29] From 1965 to the early 1970s, tires were made to an 80% aspect ratio. Tire size was again specified by width in inches and diameter in inches.

  4. European Tyre and Rim Technical Organisation - Wikipedia

    en.wikipedia.org/wiki/European_Tyre_and_Rim...

    ETRTO sizes apply to rims and tyres for vehicles of all types, including bicycles. The great advantage of ETRTO sizing is that it is unambiguous; previously, nominal dimensions were used which were interpreted in different ways by different countries and manufacturers - a problem for the end user.

  5. Wheel sizing - Wikipedia

    en.wikipedia.org/wiki/Wheel_sizing

    Off-roading tires may use a different measurement scheme: Tread width × Outside diameter, followed by wheel size (all in inches) – for example 31×10.50R15 (787 mm × 267 mm R380 in metric designation). The size of the wheel, however, is denoted as 8.5 in × 20.0 in (220 mm × 510 mm).

  6. Uniform Tire Quality Grading - Wikipedia

    en.wikipedia.org/wiki/Uniform_Tire_Quality_Grading

    Uniform Tire Quality Grading, commonly abbreviated as UTQG, is a set of standards for passenger car tires that measures a tire's treadwear, temperature resistance and traction. The UTQG was created by the National Highway Traffic Safety Administration in 1978, a branch of the United States Department of Transportation (DOT). [ 1 ]

  7. Contact patch - Wikipedia

    en.wikipedia.org/wiki/Contact_patch

    Colorized tire footprint pressure distribution. The contact patch is the portion of a vehicle's tire that is in actual contact with the road surface.It is commonly used in the discussion of pneumatic (i.e. pressurized) tires, where the term is used strictly to describe the portion of the tire's tread that touches the road surface.

  8. Plus sizing - Wikipedia

    en.wikipedia.org/wiki/Plus_sizing

    Plus sizing is the practice of replacing an automotive wheel with one of a larger diameter fitted with a new tire of lower aspect ratio so that the new tire has close to the same diameter and circumference as the original tire to minimize any changes in speedometer accuracy, torque and traction control, while reducing sidewall flex and (generally) increasing cornering ability.

  9. Bicycle tire - Wikipedia

    en.wikipedia.org/wiki/Bicycle_tire

    For example, if a fat-bike tire is inflated to 0.5 bar (50 kPa; 7.3 psi) gauge pressure at room temperature 20 °C (68 °F) and then the temperature is decreased to −10 °C (14 °F) (a 9% decrease in absolute temperature), the absolute pressure of 1.5 bar (150 kPa; 22 psi) will be decreased by 9% to 1.35 bar (135 kPa; 19.6 psi), which ...

  1. Ads

    related to: 5.00x10 tyre conversion chart dimensions