enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Stain-blocking primer - Wikipedia

   en.wikipedia.org/wiki/Stain-blocking_primer

   The below calculated ACIs were done on solvent-based primer containing 350 g/L of solvents and the water-based primer containing 50 g/L of butyl glycol. The values on this chart indicate that the use of mineral spirits based primers would need 6 to 7 air changes per hour requiring significant ventilation. The use of low-odor, isoparaffinic ...

3. Wood finishing - Wikipedia

   en.wikipedia.org/wiki/Wood_finishing

   Enhances natural figure like a drying oil, but more protective and faster drying. Low, but more than pure oil finishes. Fairly durable, but may require periodic reapplication for heavy use areas such as tables and worktops. Relatively safe once VOCs have evaporated, uses petroleum based solvents Easy.

4. Primer (paint) - Wikipedia

   en.wikipedia.org/wiki/Primer_(paint)

   Primer reduces the number of paint coats needed for good coverage and even color. A thin layer of paint may still be permeable to water. Water can permeate into the wood and cause warping, mildew, or dry rot. Primer improves the waterproofing of the finish. [4] Primers are not used as part of a wood stain treatment because they obscure the wood ...

5. Varnish - Wikipedia

   en.wikipedia.org/wiki/Varnish

   Violin varnishing is a multi-step process involving some or all of the following: primer, sealer, ground, color coats, and clear topcoat. Some systems use a drying oil varnish as described below, while others use spirit varnish made of resin(s) dissolved in alcohol. Touchup in repair or restoration is only done with solvent based varnish.

6. Paint - Wikipedia

   en.wikipedia.org/wiki/Paint

   Water-based paints and oil-based paints will cure differently based on the outside ambient temperature of the object being painted (such as a house). Usually, the object being painted must be over 10 °C (50 °F), although some manufacturers of external paints/primers claim they can be applied when temperatures are as low as 2 °C (35 °F).

7. Edge banding - Wikipedia

   en.wikipedia.org/wiki/Edge_banding

   A substrate primer may also be used as a bonding agent between the adhesive and the substrate. Thicker edge bandings typically require a slight concavity to provide a tight glue line. The thickness can vary from .018 in (0.46 mm) to 0.20 in (5 mm) or even more. The machine that applies the edge banding is called edge bander.

8. Fusion bonded epoxy coating - Wikipedia

   en.wikipedia.org/wiki/Fusion_bonded_epoxy_coating

   When used as a primer in a multi-layer polyolifine system, application temperature may be dropped based on FBE manufacturer's recommendations, in order to meet the "inter-coat adhesion" parameters. Special grade FBE coatings which can be applied at temperatures as low as 175 °C has been developed recently by certain FBE powder manufacturers.

9. Heat-shrinkable sleeve - Wikipedia

   en.wikipedia.org/wiki/Heat-shrinkable_sleeve

   Primers for heat-shrinkable sleeves work in the same manner as an FBE primer does when it is specified on 3-layer polyolefin pipeline coatings and is typically applied between 150 μm and 300 μm thick. Usually, the primer of heat shrinkable sleeve is two components non-solvent Epoxy, one is primer base and the other is curing agent.