Search results
Results from the WOW.Com Content Network
The heads from the Boss 302 became the production heads on the 335-series 351 cu in (6 L) "Cleveland" engines, which used the same bore spacing and head bolt configuration as the small block engines. As the 1980s drew to a close, Ford began the design of a new OHC V8 to replace the venerable small block design.
The SAE Gross figures for these engines was 175 hp and 227 hp. GMH Technical and Engineering literature shows these revised power figures for HJ but it took a while for it to appear in Sales literature - LX Torana release information shows the 4.2L as 175 hp and the 5.0L as 250 hp. The HJ 5.0L was a very different engine to the HT-HQ 308 though.
In 1964, horsepower increased to 366 hp (273 kW) for the newly named L-76 version, and 375 hp (280 kW) for the fuel injected L-84, making the L-84 the most powerful naturally aspirated, single-cam, production small-block V8 until the appearance of the 385 hp (287 kW), 395 lb⋅ft (536 N⋅m) Generation III LS6 in 2001. This block is one of ...
The head used during this time was the so-called "rectangle port", named after its exhaust port shape. The 290 heads use smaller valves, 1.787 in (45.4 mm) intake and 1.406 in (35.7 mm) exhaust, corresponding with its small bore. The 343 and the AMX 390 use the same larger valve heads, 2.025 in (51.4 mm) intake and 1.625 in (41.3 mm) exhaust.
Collectively all 239 engines are referred to as "100 horse" engines, although the horsepower was increased in 1952 to 110 horsepower in cars and 106 horsepower in trucks. This engine was used in Ford's transit buses during the most productive years of the company's short stint in the transit bus business from the mid-1930s to the early 1950s ...
The LA engine is a family of overhead-valve small-block 90° V-configured gasoline engines built by Chrysler Corporation between 1964 and 2003. Primarily V8s , the line includes a single V6 and V10 , both derivations of its Magnum series introduced in 1992.
These engines vary in displacement between 2.8 and 3.4 litres (2,837 and 3,350 cc) and have a cast-iron block and either cast-iron or aluminum heads. Production of these engines began in 1980 and ended in 2005 in the U.S., with production continued in China until 2010. This engine family was the basis for the GM High Value engine family.
The engine was available through mid-1965, when it was replaced by the 396 cu in (6.5 L) 375 hp (280 kW) Mark IV big-block engine. In addition, a 340 hp (254 kW) version of the 409 engine was available from 1963 to 1965, with a single 4-barrel cast iron intake mounting a Rochester 4GC square-bore carburetor, and a hydraulic-lifter camshaft.