Search results
Results from the WOW.Com Content Network
Has no built-in limit to the number of concurrent users. Uses precise clocks that do not limit the distance a tower can cover. [7] Consumes less power and covers large areas so cell size in IS-95 is larger. Able to produce a reasonable call with lower signal (cell phone reception) levels. Uses soft handoff, reducing the likelihood of dropped calls.
A disadvantage of TDMA systems is that they create interference at a frequency that is directly connected to the time slot length. This is the buzz that can sometimes be heard if a TDMA phone is left next to a radio or speakers. [9] Another disadvantage is that the "dead time" between time slots limits the potential bandwidth of a TDMA channel.
The performance of each technology is determined by a number of constraints, including the spectral efficiency of the technology, the cell sizes used, and the amount of spectrum available. For more comparison tables, see bit rate progress trends , comparison of mobile phone standards , spectral efficiency comparison table and OFDM system ...
Typical 2G standards include GSM and IS-95 with extensions via GPRS, EDGE and 1xRTT, providing Internet access to users of originally voice centric 2G networks. Both EDGE and 1xRTT are 3G standards, as defined by the ITU , but are usually marketed as 2.9G due to their comparatively low speeds and high delays when compared to true 3G technologies.
GSM networks operate in a number of different carrier frequency ranges (separated into GSM frequency ranges for 2G and UMTS frequency bands for 3G), with most 2G GSM networks operating in the 900 MHz or 1800 MHz bands. Where these bands were already allocated, the 850 MHz and 1900 MHz bands were used instead (for example in Canada and the ...
The North American Standards IS-54 and IS-136 were also second-generation (2G) mobile phone systems, known as (Digital AMPS) and used TDMA with three time slots in each 30 kHz channel, supporting 3 digitally compressed calls in the same spectrum as a single analog call in the previous AMPS standard. This was later changed to 6 half rate time ...
The name TDMA is based on the abbreviation for time-division multiple access, a common multiple access technique which is used in most 2G standards, including GSM, as well as in IS-54 and IS-136. D-AMPS competed against GSM and systems based on code-division multiple access (CDMA).
The Universal Mobile Telecommunications System (UMTS) is a 3G mobile cellular system for networks based on the GSM standard. Developed and maintained by the 3GPP (3rd Generation Partnership Project), UMTS is a component of the International Telecommunication Union IMT-2000 standard set and compares with the CDMA2000 standard set for networks based on the competing cdmaOne technology.