Search results
Results from the WOW.Com Content Network
Activated sludge tank at Beckton sewage treatment plant, UK.The white bubbles are due to the diffused air aeration system. The activated sludge process is a type of biological wastewater treatment process for treating sewage or industrial wastewaters using aeration and a biological floc composed of bacteria and protozoa.
The sludge age may be too low to enable nitrification. The typical control band for the concentration of MLSS is 2 to 4 g/L for conventional activated sludge, or up to 15 g/L for membrane bioreactors. One of the easiest control procedures for activated sludge systems is the Constant Mixed Liquor Suspended Solids method.
Activated sludge model is a generic name for a group of mathematical methods to model activated sludge systems. The research in this area is coordinated by a task group of the International Water Association (IWA). Activated sludge models are used in scientific research to study biological processes in hypothetical systems.
In most conventional activated sludge processes or aerobic granular reactor, the microorganisms grow in flocs. Flocs are defined as a mass of microorganisms that are held together by slime or fungal filaments, which help with aerobic decomposition and trapping particles (et al. Wilen). [3] Activated sludges are built with two physical separate ...
Expanded granular sludge bed digestion; Extended aeration; Facultative lagoon; Fenton's reagent; Filtration; Fine bubble diffusers; Flocculation & sedimentation; Flotation process; Forward osmosis; Froth flotation; Hydrocyclone; Imhoff tank; Induced gas flotation; Integrated fixed-film activated sludge (IFAS) Ion exchange; Lamella clarifier ...
Sewage sludge treatment is the process of removing contaminants from wastewater.Sewage sludge is produced from the treatment of wastewater in sewage treatment plants and consists of two basic forms — raw primary sludge and secondary sludge, also known as activated sludge in the case of the activated sludge process.
As the bacteria multiply and die, the sludge within the tank increases over time and a waste activated sludge (WAS) pump removes some of the sludge during the settling stage to a digester for further treatment. The quantity or “age” of sludge within the tank is closely monitored, as this can have a marked effect on the treatment process.
Extended aeration agitates all incoming waste in the sludge from a single clarifier. The combined sludge starts with a higher concentration of inert solids than typical secondary sludge and the longer mixing time required for digestion of primary solids in addition to dissolved organics produces aged sludge requiring greater mixing energy input per unit of waste oxidized.