Ads
related to: standard laminated glass thickness mm
Search results
Results from the WOW.Com Content Network
A typical laminated makeup is 2.5 mm glass, 0.38 mm interlayer, and 2.5 mm glass. This gives a final product that is referred to as 5.38 mm (0.212 inches) laminated glass. [19] Strength can be increased with multiple laminates and thicker glass.
The number of aluminum layers is always one more than the number of glass fiber layers, and the aluminum layer thickness is in millimeters, which can range from 0.2 to 0.5 mm (0.0079 to 0.0197 in; 7.9 to 19.7 mils). (Glare1 can only consist of aluminum layers of 0.3 to 0.4 mm (0.012 to 0.016 in; 12 to 16 mils) thickness, though.)
Insulating glass units (IGUs) are typically manufactured with glass in thicknesses from 3 to 10 mm (1/8" to 3/8"). Thicker glass is used in special applications. Laminated or tempered glass may also be used as part of the construction.
Glass thicknesses typically range from 1.8 to 2.5 millimetres (0.071 to 0.098 in). Clear glass has light transmission of approximately 90%, absorption of approximately 2%, and reflection of approximately 8%. Whereas absorption can be reduced by using low-iron glass, reflection can only be reduced by an anti-reflective surface treatment.
The film thickness is selected for level of protection desired and the dimensions of the glass pane. Manufacturers recommend 100 micrometer film (2 ply) for glass up to 3 mm (1/8 in) and 175 micrometer film for glass over 6 mm (1/4 in). These films can be applied for security applications, where a delay of forced entry is desired.
Tempered laminated glass is designed to shatter into small pieces, preventing possible injury. When both pieces of glass are broken it produces a "wet blanket" effect and it will fall out of its opening. Heat strengthened laminated glass is stronger than annealed, but not as strong as tempered. It is often used where security is a concern.
FR-4 (or FR4) is a NEMA grade designation for glass-reinforced epoxy laminate material. FR-4 is a composite material composed of woven fiberglass cloth with an epoxy resin binder that is flame resistant (self-extinguishing).
Laminated glass is normally used when there is a possibility of human impact or where the glass could fall if shattered. Skylight glazing and automobile windshields typically use laminated glass. In geographical areas requiring hurricane-resistant construction , laminated glass is often used in exterior storefronts, curtain walls and windows.
Ads
related to: standard laminated glass thickness mm