Search results
Results from the WOW.Com Content Network
A frequency divider, also called a clock divider or scaler or prescaler, is a circuit that takes an input signal of a frequency, , and generates an output signal of a frequency: f o u t = f i n N {\displaystyle f_{out}={\frac {f_{in}}{N}}}
When CONTROL is not driven, this divider creates an upper reference voltage of 2 ⁄ 3 V CC and a lower reference voltage of 1 ⁄ 3 V CC. When CONTROL is driven, the upper reference voltage will instead be V CONTROL and the lower reference voltage will be 1 ⁄ 2 V CONTROL.
A phase-locked loop or phase lock loop (PLL) is a control system that generates an output signal whose phase is fixed relative to the phase of an input signal. Keeping the input and output phase in lockstep also implies keeping the input and output frequencies the same, thus a phase-locked loop can also track an input frequency.
The lower, yellow trace is the N counter output whose frequency corresponds to the channel spacing frequency of 30 kHz. The green trace is the output from the dual-modulus prescaler, which happens to correspond to 7.1714 MHz in the case that the prescaler is at 128 and 7.1158 when it is at 129.
A pulse-swallowing counter is a component in an all-digital feedback system. The divider produces one output pulse for every N counts (N is usually a power of 2) when not swallowing, and per N+1 pulses when the 'swallow' signal is active. The overall pulse-swallowing system is used as part of a fractional-N frequency divider. [1]
The counter acts as a frequency divider, counting pulses from a high frequency master clock (typically several MHz) and toggling the state of its output when the count reaches some predetermined value. The frequency of the counter's output can thus be defined by the number of pulses counted, and this generates a square wave at the required ...
For example, an integrated circuit designed to be used as a volume control may have a signal input designed for 1 Vp-p, and a control input designed for 0-5 V dc; that is, the two inputs are not symmetrical and the control input will have a limited bandwidth.
Power divider in microstrip technology. In the field of microwave engineering and circuit design, the Wilkinson Power Divider is a specific class of power divider circuit that can achieve isolation between the output ports while maintaining a matched condition on all ports.