Search results
Results from the WOW.Com Content Network
The Wi-Fi IEEE 802.11 RTS/CTS is one handshake protocol that is used. Clients that wish to send data send an RTS frame, the access point then sends a CTS frame when it is ready for that particular node. For short packets the overhead is quite large, so short packets do not usually use it, the minimum size is generally configurable.
IEEE 802.11ba Wake-up Radio (WUR) Operation is an amendment to the IEEE 802.11 standard that enables energy-efficient operation for data reception without increasing latency. [83] The target active power consumption to receive a WUR packet is less than 1 milliwatt and supports data rates of 62.5 kbit/s and 250 kbit/s.
It specified two raw data rates of 1 and 2 megabits per second (Mbit/s) to be transmitted via infrared (IR) signals or by either frequency hopping or direct-sequence spread spectrum (DSSS) in the Industrial Scientific Medical frequency band at 2.4 GHz. IR remained a part of the standard until IEEE 802.11-2016, but was never implemented ...
IEEE 802.11a-1999 or 802.11a was an amendment to the IEEE 802.11 ... and reception of data at rates of 1.5 to 54 Mbit/s. ... because the path loss in signal strength ...
IEEE 802.11b-1999 or 802.11b is an amendment to the IEEE 802.11 wireless networking specification that extends throughout up to 11 Mbit/s using the same 2.4 GHz band. A related amendment was incorporated into the IEEE 802.11-2007 standard. 802.11 is a set of IEEE standards that govern wireless
IEEE 802.11ac-2013 or 802.11ac is a wireless networking standard in the IEEE 802.11 set of protocols (which is part of the Wi-Fi networking family), providing high-throughput wireless local area networks (WLANs) on the 5 GHz band. [c] The standard has been retroactively labelled as Wi-Fi 5 by Wi-Fi Alliance. [9] [10]
IEEE 802.11 RTS/CTS (request to send/clear to send) is the optional mechanism used by the 802.11 wireless networking protocol to reduce frame collisions introduced by the hidden node problem. Originally the protocol fixed the exposed node problem as well, but later RTS/CTS does not, but includes ACKs.
Wi-Fi (/ ˈ w aɪ f aɪ /) [1] [a] is a family of wireless network protocols based on the IEEE 802.11 family of standards, which are commonly used for local area networking of devices and Internet access, allowing nearby digital devices to exchange data by radio waves.