Ad
related to: the usb device you connected malfunctionedwiki-tech.net has been visited by 10K+ users in the past month
Search results
Results from the WOW.Com Content Network
The maximum signaling rate in USB 2.0 is 480 Mbit/s (60 MB/s) per controller and is shared amongst all attached devices. Some personal computer chipset manufacturers overcome this bottleneck by providing multiple USB 2.0 controllers within the southbridge.
To allow for voltage drops, the voltage at the host port, hub port, and device are specified to be at least 4.75 V, 4.4 V, and 4.35 V respectively by USB 2.0 for low-power devices, [a] but must be at least 4.75 V at all locations for high-power [b] devices (however, high-power devices are required to operate as a low-powered device so that they ...
Screenshot of Device Manager, containing a Qualcomm device booted in the Emergency Download Mode. The Qualcomm Emergency Download mode, commonly known as Qualcomm EDL mode and officially known as Qualcomm HS-USB QD-Loader 9008 [1] is a feature implemented in the boot ROM of a system on a chip by Qualcomm which can be used to recover bricked smartphones.
The throughput of each USB port is determined by the slower speed of either the USB port or the USB device connected to the port. High-speed USB 2.0 hubs contain devices called transaction translators that convert between high-speed USB 2.0 buses and full and low speed buses. There may be one translator per hub or per port.
USB On-The-Go (USB OTG or just OTG) is a specification first used in late 2001 that allows USB devices, such as tablets or smartphones, to also act as a host, allowing other USB devices, such as USB flash drives, digital cameras, mouse or keyboards, to be attached to them. Use of USB OTG allows devices to switch back and forth between the roles ...
Juice jacking is not possible if a device is charged via a trusted AC adapter or battery backup device, or if using a USB cable with only power wires. For USB cables with data wires, a USB data blocker (sometimes called a USB condom) [25] can be connected between device and charging port to disallow a data connection. [26]
The xHCI reduces the need for periodic device polling by allowing a USB 3.0 or later device to notify the host controller when it has data available to read, and moves the management of polling USB 2.0 and 1.1 devices that use interrupt transactions from the CPU-driven USB driver to the USB host controller.
Sometimes referred to as a "WUSB hub", a DWA allows existing USB 2.0 devices to be used wirelessly with a WUSB host. WUSB host capability can be added to existing PCs through the use of a Host Wire Adapter (HWA). The HWA is a USB 2.0 device that attaches externally to a desktop or laptop's USB port or internally to a laptop's MiniCard interface.
Ad
related to: the usb device you connected malfunctionedwiki-tech.net has been visited by 10K+ users in the past month