Search results
Results from the WOW.Com Content Network
Angular field of view is typically specified in degrees, while linear field of view is a ratio of lengths. For example, binoculars with a 5.8 degree (angular) field of view might be advertised as having a (linear) field of view of 102 mm per meter. As long as the FOV is less than about 10 degrees or so, the following approximation formulas ...
Typically, binoculars with a magnification of 8× to 10× are used, though many manufacturers produce models with 7× magnification for a wider field of view and increased depth of field. The other main consideration for birdwatching binoculars is the size of the objective that collects light.
In biology, binocular vision is a type of vision in which an animal has two eyes capable of facing the same direction to perceive a single three-dimensional image of its surroundings. Binocular vision does not typically refer to vision where an animal has eyes on opposite sides of its head and shares no field of view between them, like in some ...
The binocular visual field is the superimposition of the two monocular fields. In the binocular field, the area left of the vertical meridian is referred to as the left visual field (which is located temporally for the left, and nasally for the right eye); a corresponding definition holds for the right visual field.
For example, a 10 × 42 binocular has a 4.2 mm wide exit cone, and fairly comfortable for general use, whereas doubling the magnification with a zoom feature to 20 × results in a much more critical 2.1 mm exit cone. Optics showing eye relief and exit pupil 1 Real image 2 Field diaphragm 3 Eye relief 4 Exit pupil
It is used interchangeably with the more general term field of view. It is important to distinguish the angle of view from the angle of coverage, which describes the angle range that a lens can image on a given image sensor or film location (the image plane). In other words, the angle of coverage is determined by the lens and the image plane ...
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
The object in designing a field flattening lens is to create a lens that shifts the focal points of the Petzval surface to lie in the same plane. Consider inserting a pane of glass in a focusing beam. Due to refraction, the focal point of the beam is shifted by dependent on the thickness of the glass. Thus we have a thickness as a function of ...