Search results
Results from the WOW.Com Content Network
Ferrocement or ferro-cement [1] is a system of construction using reinforced mortar [2] or plaster (lime or cement, sand, and water) applied over an "armature" of metal mesh, woven, expanded metal, or metal-fibers, and closely spaced thin steel rods such as rebar. The metal commonly used is iron or some type of steel, and the mesh is made with ...
Concrete is a mixture of coarse (stone or brick chips) and fine (generally sand and/or crushed stone) aggregates with a paste of binder material (usually Portland cement) and water. When cement is mixed with a small amount of water, it hydrates to form microscopic opaque crystal lattices encapsulating and locking the aggregate into a rigid shape.
Pages in category "Water tanks on the National Register of Historic Places" The following 16 pages are in this category, out of 16 total. This list may not reflect recent changes .
An elevated water tank, also known as a water tower, will create a pressure at the ground-level outlet of 1 kPa per 10.2 centimetres (4.0 in) or 1 psi per 2.31 feet (0.70 m) of elevation. Thus a tank elevated to 20 metres creates about 200 kPa and a tank elevated to 70 feet creates about 30 psi of discharge pressure, sufficient for most ...
Family Dollar Stores recalled about 67,000 remote-controlled toy tanks after getting five reports of the controllers overheating and melting, the U.S. Consumer Product Safety Commission said. So ...
Although many were small, a tank at Bougival (1872) with a domical roof had a volume of 130 cubic metres. Two tanks of 1000 cubic metres each were built at what is now Bruyères à Sèvres. The two-storey reservoir at Pessac has a 10 cubic metre tank perched above a 20 cubic metre tank, the supporting columns being in the form of tree trunks.
Beaumont St. Louis and San Francisco Railroad Water Tank (1875, restored 2012), Beaumont, Kansas, US. Although the use of elevated water storage tanks has existed since ancient times in various forms, the modern use of water towers for pressurized public water systems developed during the mid-19th century, as steam-pumping became more common, and better pipes that could handle higher pressures ...
In agriculture water storage, water is stored for later use in natural water sources, such as groundwater aquifers, soil water, natural wetlands, and small artificial ponds, tanks and reservoirs behind major dams. Storing water invites a host of potential issues regardless of that water's intended purpose, including contamination through ...