Search results
Results from the WOW.Com Content Network
The Intel 8085 ("eighty-eighty-five") is an 8-bit microprocessor produced by Intel and introduced in March 1976. [2] It is the last 8-bit microprocessor developed by Intel. It is software-binary compatible with the more-famous Intel 8080 with only two minor instructions added to support its added interrupt and serial input/output features.
The 8255 is a member of the MCS-85 family of chips, designed by Intel for use with their 8085 and 8086 microprocessors and their descendants. [1] It was first available in a 40-pin DIP and later a 44-pin PLCC packages. [2] It found wide applicability in digital processing systems and was later cloned by other manufacturers.
The 8259 may be configured to work with an 8080/8085 or an 8086/8088. On the 8086/8088, the interrupt controller will provide an interrupt number on the data bus when an interrupt occurs. The interrupt cycle of the 8080/8085 will issue three bytes on the data bus (corresponding to a CALL instruction in the 8080/8085 instruction set).
The Intel 8080 ("eighty-eighty") is the second 8-bit microprocessor designed and manufactured by Intel.It first appeared in April 1974 and is an extended and enhanced variant of the earlier 8008 design, although without binary compatibility. [3]
30-pin SIMM, 256 KB capacity Two 30-pin SIMM slots on an IBM PS/2 Model 50 motherboard. Standard sizes: 256 KB, 1 MB, 4 MB, 16 MB. 30-pin SIMMs have 12 address lines, which can provide a total of 24 address bits. With an 8-bit data width, this leads to an absolute maximum capacity of 16 MB for both parity and non-parity modules (the additional redundancy-bit chip usually doe
The SDK-85 MCS-85 System Design Kit was a single board microcomputer system kit using the Intel 8085 processor, clocked at 3 MHz with a 1.3 μs instruction cycle time. It contained all components required to complete construction of the kit, including LED display, keyboard, resistors, caps, crystal, and miscellaneous hardware.
Closeup of the pins of a pin grid array The pin grid array at the bottom of prototype Motorola 68020 microprocessor The pin grid array on the bottom of an AMD Phenom X4 9750 processor that uses the AMD AM2+ socket. A pin grid array (PGA) is a type of integrated circuit packaging. In a PGA, the package is square or rectangular, and the pins are ...
Operation mode of the PIT is changed by setting the above hardware signals. For example, to write to the Control Word Register, one needs to set CS =0, RD =1, WR =0, A1=A0=1. The control word register contains the programmed information which will be sent (by the microprocessor) to the device. It defines how each channel of the PIT logically works.