Search results
Results from the WOW.Com Content Network
[4] [5] Base isolators for seismic isolation of buildings, bridges, etc. Base isolators made of layers of neoprene and steel with a low horizontal stiffness are used to lower the natural frequency of the building. Some other base isolators are designed to slide, preventing the transfer of energy from the ground to the building. Tuned mass dampers
Orifice plate showing vena contracta. An orifice plate is a thin plate with a hole in it, which is usually placed in a pipe. When a fluid (whether liquid or gaseous) passes through the orifice, its pressure builds up slightly upstream of the orifice [1] but as the fluid is forced to converge to pass through the hole, the velocity increases and the fluid pressure decreases.
An especially common rental cylinder provided at tropical dive resorts is the "aluminium-S80" which is an aluminum cylinder design with an internal volume of 0.39 cubic feet (11.0 L) rated to hold a nominal volume of 80 cubic feet (2,300 L) of atmospheric pressure gas at its rated working pressure of 3,000 pounds per square inch (207 bar). [9]
For comparison, phenolic foam insulation has a k-value of around 0.018 W/(m⋅K), [23] while wood varies anywhere from 0.15 to 0.75 W/(m⋅K), and steel has a k-value of approximately 50.0 W/(m⋅K). These figures vary from product to product, so the UK and EU have established a 90/90 standard which means that 90% of the product will conform to ...