Search results
Results from the WOW.Com Content Network
The oil is dyed blue to make it easier to recognize in the gasoline. It appears black in this bottle because it is not diluted. Two-stroke oil (also referred to as two-cycle oil, 2-cycle oil, 2T oil, or 2-stroke oil) is a special type of motor oil intended for use in crankcase compression two-stroke engines, typical of small gasoline-powered ...
The oil is contained in a reservoir that connects to a small oil pump in the engine, which needs to be periodically refilled. Oil injection pump on a Yamaha DX100 - just behind the carburettor (visible on the left) It is the primary component of two-stroke automatic lubrication system.
The Wärtsilä RT-flex96C is a two-stroke turbocharged low-speed diesel engine designed by the Finnish manufacturer Wärtsilä. It is designed for large container ships that run on heavy fuel oil . Its largest 14-cylinder version is 13.5 meters high, 26.59 meters long, weighs over 2,300 tonnes , and produces 80.08 megawatts .
A check valve, non-return valve, reflux valve, retention valve, foot valve, or one-way valve is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction. [1] Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave. There are various ...
A stroke is the action of a piston travelling the full length of its cylinder.In a two-stroke engine, one of the two strokes combines primarily the intake stroke and the combustion stroke, while the other stroke primarily combines the compression stroke and the exhaust stroke, though technically since both ports are exposed during both the combustion and compression strokes, some reversion ...
A Cox Babe Bee 0.049 in 3 (0.80 cm 3) reed valve engine, disassembled, uses glow-plug ignition. Its mass is 64 g. The reed valve is a simple but highly effective form of check valve commonly fitted in the intake tract of the piston-controlled port. It allows asymmetric intake of the fuel charge, improving power and economy, while widening the ...
These engines were designed to have a total-loss lubrication system, with the motor oil held in a separate tank from the fuel in the vehicle, and not pre-mixed with it as with two-cycle engines, but mixed within the engine instead while running. Castor oil was often used because it lubricates well at the high temperatures found in air-cooled ...
By Sulzer standards this had a very small 4-cylinder two-stroke engine of just 100 bhp. The boat was only 60 foot long, and as part of its trials the engine had been successfully run on full power for a period of 24 hours, reaching over 10 knots. The vessel was bought for £3,000 to be the subject for further experimental work. [10]