Search results
Results from the WOW.Com Content Network
Chrome steel knife. Chrome steel is the name for any one of a class of non-stainless steels such as AISI 52100, SUJ2, 100Cr6, [1] En31, 100C6, and DIN 5401 which are used for applications such as bearings, tools, drills and utensils.
It consists of a prefix letter and five digits designating a material composition. For example, a prefix of S indicates stainless steel alloys, C indicates copper, brass, or bronze alloys, T indicates tool steels, and so on. The first 3 digits often match older 3-digit numbering systems, while the last 2 digits indicate more modern variations.
A514 is a particular type of high strength steel, which is quenched and tempered alloy steel, with a yield strength of 100,000 psi (100 ksi or approximately 700 MPa).The ArcelorMittal trademarked name is T-1. [1]
Although molybdenum-rich high-speed steels such as AISI M1 had seen some use since the 1930s, it was the material shortages and high costs caused by WWII that spurred development of less expensive alloys substituting molybdenum for tungsten. The advances in molybdenum-based high speed steel during this period put them on par with, and in ...
Martensitic stainless steels can be high- or low-carbon steels built around the composition of iron, 12% up to 17% chromium, carbon from 0.10% (Type 410) up to 1.2% (Type 440C): [8] The chromium and carbon contents are balanced to have a martensitic structure.
4. Materials and Manufacture of ASTM A53 Pipes 4.1 The steel for both seamless and welded pipe shall be made by one or more of the following processes: open-hearth, electric-furnace, or basic-oxygen. 4.2 If steels of different grades are sequentially strand cast, identification of the resultant transition material is required.
ASTM A500 defines four grades of carbon steel based primarily on material strength. [ 1 ] This is a standard set by the standards organization ASTM International , a voluntary standards development organization that sets technical standards for materials, products, systems, and services.
Fe – Cr Phase diagram. To qualify as stainless steel, Fe-base alloys must contain at least 10.5% Cr. The iron-chromium phase diagram shows that up to about 13% Cr, the steel undergoes successive transformations upon cooling from the liquid phase from ferritic α phase to austeni