Search results
Results from the WOW.Com Content Network
PC2-5300 DDR2 SO-DIMM (for notebooks) Comparison of memory modules for desktop PCs (DIMM) Comparison of memory modules for portable/mobile PCs (SO-DIMM) The key difference between DDR2 and DDR SDRAM is the increase in prefetch length. In DDR SDRAM, the prefetch length was two bits for every bit in a word; whereas it is four bits in DDR2 SDRAM.
Memory controller with differential serial connections to DDR2 FB-DIMMs. The AMB is visible in the center of each DIMM. A Fully Buffered DIMM (FB-DIMM) is a type of memory module used in computer systems. It is designed to improve memory performance and capacity by allowing multiple memory modules to be each connected to the memory controller ...
In 2008, Micron Technology acquired a 35.5% stake in Inotera from Qimonda as Qimonda underwent restructuring. The Company reached full conversion to 70 nm shrink technology at the end of June 2008 and started pilot production of Micron’s 50 nm stack process technology from the third quarter of 2009 in order to further improve the productivity and to reduce manufacturing unit cost.
Dynamic random-access memory (dynamic RAM or DRAM) is a type of random-access semiconductor memory that stores each bit of data in a memory cell, usually consisting of a tiny capacitor and a transistor, both typically based on metal–oxide–semiconductor (MOS) technology. While most DRAM memory cell designs use a capacitor and transistor ...
Nano-RAM is a proprietary computer memory technology from the company Nantero.It is a type of nonvolatile random-access memory based on the position of carbon nanotubes deposited on a chip-like substrate.
Low-Power Double Data Rate (LPDDR), also known as LPDDR SDRAM, is a type of synchronous dynamic random-access memory (SDRAM) that consumes less power than other random access memory designs and is thus targeted for mobile computing devices such as laptop computers and smartphones. Older variants are also known as Mobile DDR, and abbreviated as ...
Compared to DDR2 memory, DDR3 memory uses less power. Some manufacturers further propose using "dual-gate" transistors to reduce leakage of current. [10]According to JEDEC, [11]: 111 1.575 volts should be considered the absolute maximum when memory stability is the foremost consideration, such as in servers or other mission-critical devices.
Flash memory is an electronic non-volatile computer memory storage medium that can be electrically erased and reprogrammed. The two main types of flash memory, NOR flash and NAND flash, are named for the NOR and NAND logic gates. Both use the same cell design, consisting of floating-gate MOSFETs. They differ at the circuit level depending on ...