Search results
Results from the WOW.Com Content Network
FRP tanks and vessels designed as per BS 4994 are widely used in the chemical industry in the following sectors: chlor-alkali manufacturers, fertilizer, wood pulp and paper, metal extraction, refining, electroplating, brine, vinegar, food processing, and in air pollution control equipment, especially at municipal waste water treatment plants and water treatment plants.
Cows at a stock tank with piped water. See Stock tank oil for oil industry stock tank definition. A stock tank is used to provide drinking water for animals such as cattle or horses. Stock tanks can range in size from 100 liters to over 5500 liters (30 to 1500 gallons) and typically are made of galvanized steel.
Because both grades guarantee a minimum piece thickness – at least 1 ⁄ 4 inch (6.35 mm) for HMS 1, and 1 ⁄ 8 inch (3.175 mm) for HMS 2 – consignments have a high density. Both also have defined maximum dimensions (usually 60 in × 24 in or 1,524 mm × 610 mm), and should be prepared to facilitate handling and charging to a furnace.
Most nations describe paper in terms of grammage—the weight in grams of one sheet of the paper measuring one square meter.. Other people, especially in the United States, describe paper in terms of pound weight—the weight in pounds per ream (500 sheets) of the paper with a given area (based on historical production sizes before trimming): for card stock, this is 20 by 26 in (508 by 660 mm ...
Greaseproof paper is paper that is impermeable to oil or grease, and is normally used in cooking or food packaging. It is usually produced by refining the paper stock [ further explanation needed ] and thus creating a sheet with very low porosity .
There are four types of materials available: O-1 tool steel, A-2 tool steel, A-6 tool steel, and 1018 steel (low-carbon or low-carb steel). Lengths are either 18 or 36 in (457 or 914 mm) long, various widths up to 16 in (406 mm) are available, and thicknesses range from 1 ⁄ 64 to 2.875 in (0.40 to 73.03 mm).
CSST is used as an alternative to the older standard “black iron” (steel) gas pipe. The inner stainless steel layer of typical residential CSST is .2 to .3 mm thick while the wall thickness of typical residential “black iron” gas pipe is 3 to 4 mm thick. CSST is more expensive than “black iron” gas pipe.
In contrast, a typical sheet of photocopy paper is 0.097 mm (0.004 in; 4 mils) thick, while a typical business card is 0.234 mm (0.009 in; 9 mils) thick.) [27] The thickness of a Glare grade does not need to be separately specified, because each pre-preg ply has a nominal thickness of 0.125 mm (0.0049 in; 4.9 mils), and the number of plies is ...