Search results
Results from the WOW.Com Content Network
Increasing the rotational inertia of the front wheel by increasing the speed of the vehicle and the rotational speed of the wheel will tend to counter the wheel flop effect. A certain amount of wheel flop is generally considered to be desirable. Bicycle Quarterly magazine states, "A bike with too little wheel flop will be sluggish in its ...
This article should really be called bicycle and motorcycle steering geometry. The "geometry" of a bicycle also refers to the length of its various tubes, which is of more concern for ergonomic fit than for its effect on handling characteristics. -- pde 23:30, 13 December 2006 (UTC) Those other parameters could certainly be added.
For a sample motorcycle moving at 22 m/s (50 mph) that has a front wheel with a moment of inertia of 0.6 kg·m 2, turning the front wheel one degree in half a second generates a roll moment of 3.5 N·m. In comparison, the lateral force on the front tire as it tracks out from under the motorcycle reaches a maximum of 50 N.
Interactive geometry software (IGS) or dynamic geometry environments (DGEs) are computer programs which allow one to create and then manipulate geometric constructions, primarily in plane geometry. In most IGS, one starts construction by putting a few points and using them to define new objects such as lines , circles or other points.
A script that lets the sprite say Hello, World! then stops the script in Scratch 2.0. In Scratch 2.0, the stage area is on the left side, with the programming blocks palette in the middle, and the coding area on the right. Extensions are in the "More Blocks" section of the palette. [22] The web version of Scratch 2.0 introduced project autosaving.
[10] For a sample motorcycle moving at 22 m/s (50 mph) that has a front wheel with a moment of inertia of 0.6 kgm 2, turning the front wheel one degree in half a second generates a roll moment of 3.5 Nm. In comparison, the lateral force on the front tire as it tracks out from under the motorcycle reaches a maximum of 50 N.
The Steffey motorcycle in 1902, essentially a bicycle with a two-stroke engine attached, used wooden, rims with wire spokes. [1] This style of wheel evolved into a stouter motorcycle-specific wheel, still with spokes, up to the 1960s and beyond. [2]: 134 In April, 1922, Borrani started production of motorcycle wheels with an aluminium rim. [3]
As the early motorcycle industry progressed, larger tyre sizes accompanied larger engine displacements, so that by 1909–1914, 2 + 1 ⁄ 4 in (57 mm) section, 26 in (660 mm) diameter tyres were used on 250 to 350 cc (15 to 21 cu in) motorcycles, and 2 + 3 ⁄ 8 to 2 + 1 ⁄ 2 in (60 to 64 mm) section tyres appeared on motorcycles with ...