Search results
Results from the WOW.Com Content Network
For example, 4% electrical steel has an initial relative permeability (at or near 0 T) of 2,000 and a maximum of 38,000 at T = 1 [5] [6] and different range of values at different percent of Si and manufacturing process, and, indeed, the relative permeability of any material at a sufficiently high field strength trends toward 1 (at magnetic ...
Ferromagnetic materials are noticeably attracted to a magnet, which is a consequence of their substantial magnetic permeability. Magnetic permeability describes the induced magnetization of a material due to the presence of an external magnetic field. For example, this temporary magnetization inside a steel plate accounts for the plate's ...
The relation between the magnetizing field H and the magnetic field B can also be expressed as the magnetic permeability: = / or the relative permeability = /, where is the vacuum permeability. The permeability of ferromagnetic materials is not constant, but depends on H .
The typical relative permeability (μ r) of electrical steel is 4,000-38,000 times that of vacuum, compared to 1.003-1800 for stainless steel. [ 15 ] [ 16 ] [ 17 ] The magnetic properties of electrical steel are dependent on heat treatment , as increasing the average crystal size decreases the hysteresis loss.
Stainless steel, also known as inox, corrosion-resistant steel ... Magnetic permeability of some austenitic stainless steel grades after annealing 2 hours at 1050 ...
In this technique, permeability variations are suppressed by applying a magnetic field. The saturation probes contain conventional eddy current coils and magnets. This inspection is used on partially ferromagnetic materials such as nickel alloys, duplex alloys, and thin-ferromagnetic materials such as ferritic chromium molybdenum stainless steel.
For a magnetic circuit constructed with an air gap or air gaps, the permeability of a hypothetical homogeneous material which would provide the same reluctance; (these "effective" above are sizes of a toroid core made from the same material which has the same magnetic properties as the core); Minimum cross-section, A min; Inductance factor, A L
Highly magnetic materials have a reduced skin depth owing to their large permeability as was pointed out above for the case of iron, despite its poorer conductivity. A practical consequence is seen by users of induction cookers, where some types of stainless steel cookware are unusable because they are not ferromagnetic.