Search results
Results from the WOW.Com Content Network
The combinations for some electronic locks can be retrieved by examining electromagnetic emissions coming from the lock. Because of this, many safe locks used to protect critical infrastructure are tested and certified to resist TEMPEST attacks. These include the Kaba Mas X-10 and S&G 2740B, which are FF-L-2740B compliant.
A Wordlock letter combination lock.. A combination lock is a type of locking device in which a sequence of symbols, usually numbers, is used to open the lock. The sequence may be entered using a single rotating dial which interacts with several discs or cams, by using a set of several rotating discs with inscribed symbols which directly interact with the locking mechanism, or through an ...
This will allow the safe to be opened when the batteries are changed after the pre-set time if the correct code is entered. Some electronic combination locks with a time-delay feature require the code to be entered twice: once to start the timer, and a second to unlock and open the safe entered after the delay period has expired.
Many combination locks have three wheels, but the lock may be equipped with additional wheels, each with a drive pin and fly, in a similar manner. The number of wheels in the mechanism determines the number of specific dial positions that must be entered to open the lock, so a three-sequence combination is required for a three-wheel lock.
A quick demonstration of an electronic door lock. An electronic lock (or electric lock) is a locking device which operates by means of electric current. Electric locks are sometimes stand-alone with an electronic control assembly mounted directly to the lock.
A Chubb detector lock is a lever tumbler lock with an integral security feature, a re-locking device, which frustrates unauthorised access attempts and indicates to the lock's owner that it has been interfered with. When someone tries to pick the lock or to open it using the wrong key, the lock is designed to jam in a locked state until ...
The Bramah lock used a cylindrical key and keyhole, as does the current lock. The end of the key has a number of slots of different depths which, when inserted into the lock and pressed against spring tension, would depress a number of wafers to a specified depth and enable the key to turn and open the lock.
The amount of rotation required to achieve full closure depends on the number of unthreaded sectors. The minimum balanced arrangement has two sectors of 90°, and requires 1/4 turn to lock. three sectors of 60° requires 1/6 turn to lock, and the typical arrangement on a diving helmet, four sectors of 45°, requires 1/8 turn to lock. [2]