enow.com Web Search

  1. Ads

    related to: concrete slurry mix

Search results

  1. Results from the WOW.Com Content Network
  2. Foam concrete - Wikipedia

    en.wikipedia.org/wiki/Foam_concrete

    Foam concrete is a versatile building material with a simple production method that is relatively inexpensive compared to autoclave aerated concrete. [1] Foam concrete compounds utilising fly ash in the slurry mix is cheaper still, and has less environmental impact.

  3. Slurry wall - Wikipedia

    en.wikipedia.org/wiki/Slurry_wall

    The density of the slurry mix must be carefully monitored and adjusted to produce the correct outward pressure to prevent the trench walls from collapsing. Slurry walls are typically constructed by starting with a set of concrete guide walls, typically 1 metre (3 ft 3 in) deep and 0.5 metres (1 ft 8 in) thick.

  4. Concrete - Wikipedia

    en.wikipedia.org/wiki/Concrete

    Instead of using a 'nominal mix' of 1 part cement, 2 parts sand, and 4 parts aggregate, a civil engineer will custom-design a concrete mix to exactly meet the requirements of the site and conditions, setting material ratios and often designing an admixture package to fine-tune the properties or increase the performance envelope of the mix ...

  5. Controlled low strength material - Wikipedia

    en.wikipedia.org/wiki/Controlled_low_strength...

    It also flows much better than ordinary concrete, having the consistency of a milkshake. The first known use of CLSM was in 1964. [2] CLSM is typically a ready mix concrete rather than soil cement which is a low strength cement made using local soil, and is similar to a slurry.

  6. Rawmill - Wikipedia

    en.wikipedia.org/wiki/Rawmill

    Mix 1: General-purpose cement: 88.0% gray limestone, 8.9% clay, 2.2% sand and 0.9% millscale. ... Alkalis are also deleterious to concrete, ... a thinner slurry is ...

  7. Thick bed mortar - Wikipedia

    en.wikipedia.org/wiki/Thick_Bed_Mortar

    The thick bed mortar method has been around for hundreds, if not thousands of years. Historically, a sand/cement mixture was mixed with water to a fairly dry consistency and was spread on either a portland cement water paste (neat cement), or over cement powder spread on the surface which is then sprayed with water to create a slurry coat and spread over the surface. [1]

  8. Types of concrete - Wikipedia

    en.wikipedia.org/wiki/Types_of_concrete

    Regular concrete can typically withstand a pressure from about 10 MPa (1450 psi) to 40 MPa (5800 psi), with lighter duty uses such as blinding concrete having a much lower MPa rating than structural concrete. Many types of pre-mixed concrete are available which include powdered cement mixed with an aggregate, needing only water. [citation needed]

  9. Slurry - Wikipedia

    en.wikipedia.org/wiki/Slurry

    A slurry composed of glass beads in silicone oil flowing down an inclined plane Potato starch slurry. A slurry is a mixture of denser solids suspended in liquid, usually water. The most common use of slurry is as a means of transporting solids or separating minerals, the liquid being a carrier that is pumped on a device such as a centrifugal pump.

  1. Ads

    related to: concrete slurry mix