Ads
related to: front panel usb 30 port cable plug box with 2 plates and one wireebay.com has been visited by 1M+ users in the past month
Search results
Results from the WOW.Com Content Network
The USB 3.0 Micro-B plug effectively consists of a standard USB 2.0 Micro-B cable plug, with an additional 5 pins plug "stacked" to the side of it. In this way, cables with smaller 5 pin USB 2.0 Micro-B plugs can be plugged into devices with 10 contact USB 3.0 Micro-B receptacles and achieve backward compatibility.
The front panel data port (FPDP) is a bus that provides high speed data transfer between two or more VMEbus boards at up to 160 Mbit/s with low latency. The FPDP bus uses a 32-bit parallel synchronous bus wired with an 80-conductor ribbon cable. [1] The following interface functions are supported: [2]
As time went on, some manufacturers desired connectors even smaller than the SCSI-2 connector. One such in somewhat common use was the VHDCI (Very High Density Cable Interconnect) connector, also known as an "AMP HPCN68M", and sometimes as "SCSI-5". There are 68 pins on the connector in two rows; the pins are 0.8 mm apart.
USB 3.0 and later specifications define one dedicated pair for USB 2.0 compatibility and two or four pairs for data transfer: two data wire pairs realising full-duplex (FDx) for single lane (×1) variants require at least SuperSpeed (SS) connectors; four pairs realising full-duplex for two lane (×2) variants require USB-C connectors.
Additionally, USB ports are color-coded according to the specification and data transfer speed, e.g. USB 1.x and 2.x ports are usually white or black, and USB 3.0 ones are blue. SuperSpeed+ connectors are teal in color. [2] FireWire ports used with video equipment (among other devices) can be either 4-pin or 6-pin. The two extra conductors in ...
USB 3.0 also introduced a new Micro-B cable plug, which consists of a standard USB 1.x/2.0 Micro-B cable plug, with an additional 5-pin plug "stacked" beside it. That way, the USB 3.0 Micro-B host receptacle preserves its backward compatibility with the USB 1.x/2.0 Micro-B cable plug, allowing devices with USB 3.0 Micro-B ports to run at USB 2. ...
This difference is reflected in the bus connectors used, in that USB cables are asymmetrical (one end Type A, other end Type B) while FireWire cables may have identical connectors at both ends. The more-recent USB-C cables may also have identical connectors on both ends (in which case the logical A and B ends are negotiated between the attached ...
eSATAp throughput is not necessarily the same as SATA, many enclosures and docks that support both eSATA and USB use combo bridge chips which can severely reduce the throughput, and USB throughput is that of the USB version supported by the port (typically USB 3.0 or 2.0). eSATAp ports (bracket versions [clarification needed]) can run at a ...
Ads
related to: front panel usb 30 port cable plug box with 2 plates and one wireebay.com has been visited by 1M+ users in the past month