Search results
Results from the WOW.Com Content Network
Photomicrograph made with a scanning electron microscope and back-scatter detector: cross section of fly ash particles. Fly ash, flue ash, coal ash, or pulverised fuel ash (in the UK)—plurale tantum: coal combustion residuals (CCRs)—is a coal combustion product that is composed of the particulates that are driven out of coal-fired boilers together with the flue gases.
They are produced at temperatures of 1,500 to 1,750 °C (2,730 to 3,180 °F) through complicated chemical and physical transformation. Their chemical composition and structure varies considerably depending on the composition of coal that generated them. The ceramic particles in fly ash have three types of structures.
Lye – potash in a water solution, formed by leaching wood ashes. Potash – potassium carbonate, formed by evaporating lye; also called salt of tartar. K 2 CO 3; Pearlash – formed by baking potash in a kiln. Milk of sulfur (lac sulphuris) – formed by adding an acid to thion hudor (lime sulfur). Natron/soda ash/soda – sodium carbonate ...
Portland-fly ash cement contains up to 40% fly ash under ASTM standards (ASTM C595), or 35% under EN standards (EN 197–1). The fly ash is pozzolanic , so that ultimate strength is maintained. Because fly ash addition allows a lower concrete water content, early strength can also be maintained.
This page contains tables of azeotrope data for various binary and ternary mixtures of solvents. The data include the composition of a mixture by weight (in binary azeotropes, when only one fraction is given, it is the fraction of the second component), the boiling point (b.p.) of a component, the boiling point of a mixture, and the specific gravity of the mixture.
Biological substances can experience leaching themselves, [2] as well as be used for leaching as part of the solvent substance to recover heavy metals. [6] Many plants experience leaching of phenolics, carbohydrates, and amino acids, and can experience as much as 30% mass loss from leaching, [5] just from sources of water such as rain, dew, mist, and fog. [2]
Pellets of soda lye (sodium hydroxide) Pellets of potash lye (potassium hydroxide)Lye is a hydroxide, either sodium hydroxide or potassium hydroxide.The word lye most accurately refers to sodium hydroxide (NaOH), [citation needed] but historically has been conflated to include other alkali materials, most notably potassium hydroxide (KOH).
Fly ash bricks. Fly ash brick (FAB) is a building material, specifically masonry units, containing class C or class F fly ash and water. Compressed at 28 MPa (272 atm) and cured for 24 hours in a 66 °C steam bath, then toughened with an air entrainment agent, the bricks can last for more than 100 freeze-thaw cycles.