Search results
Results from the WOW.Com Content Network
Early production 2.0 L engines used a hydraulic tensioner to tension the timing belt. 2000 and 2001 engines used a mechanical spring-loaded tensioner that tended to wear out prematurely, causing serious valve and piston damage upon belt failure due to the interference design of the engine. 2002 and up engines utilized a different mechanical ...
The 2.2l S10/Sonoma had the starter located in the same position as front wheel drive cars. A rear wheel drive bellhousing is displayed at right, and the integrated front wheel drive bellhousing is displayed at the lower right (in this case, as a part of the GM 6T70 Transmission). GM 60-Degree 2.8/3.1/3.4/3.5/3.9 L V6 (also used by AMC) Buick ...
The 2TR-FE is a 2.7 L (2,693 cc) Straight-4 gasoline engine. It features DOHC, 16 valves and VVT-i. It features DOHC, 16 valves and VVT-i. Maximum power is 118 kW (158 hp; 160 PS) at 5,200 rpm, and 25.1 kg⋅m (246 N⋅m; 182 lbf⋅ft) of torque at 3,800 rpm with redline of 5500 rpm.
4 L 2.179 L (133.0 in 3) ... Initially designed in 1969 as a 3.6-liter four cylinder or a 5.4-liter six-cylinder direct ... It was used in the Isuzu D-Max LT 4X4 ...
The Ford Duratorq engine, commonly referred to as Duratorq, is the marketing name of a range of Ford diesel engines introduced in 2000. The larger capacity 5-cylinder units use the Power Stroke branding when installed in North American-market vehicles.
The 2L-T is a 2.4 L (2,446 cc) turbo version of the 2L still being produced since 1982. The bore and stroke are the same but the 2L-T has a compression ratio of 20:1. Output is 85 to 91 PS (63 to 67 kW; 84 to 90 hp) gross at 4000 rpm with 19.2 kg⋅m (188 N⋅m; 139 lb⋅ft) gross of torque at 2200 rpm.
The 2.4L version is an inline 4-cylinder engine that carries a bore of 88.0 mm, stroke of 97.0 mm and a 10.5:1 compression ratio; the engine dry weight is 146 kg (322 lb) and it makes 165 PS (121 kW; 163 hp) at 5,800 rpm and 22.3–23 kg⋅m (161–166 lb⋅ft; 219–226 N⋅m) of torque at 4,250 rpm.
The 2.4 L (2,389 cc) KA24DE was used in many Nissan cars and trucks. Most KA24DEs bound for the US were built in the city of Aguascalientes, Mexico , with the exceptions of the 240SX, 1994-97 Altima (re-badged Bluebird SSS), and the U13 Bluebird released in Australia with FWD configuration, which were manufactured in Yokohama, Kanagawa , Japan ...