Ads
related to: standing seam metal roof details to masonry cavity wall
Search results
Results from the WOW.Com Content Network
Standing-seam metal roof with concealed fasteners. Mechanically seamed metal with concealed fasteners contains sealant in seams for use on very low sloped roofs, suitable for roofs of low pitch such as 0.5/12 to 3/12 pitch. Flat-seam metal with or without soldered seams. Steel coated with a coloured alloy of zinc and aluminium. Stone-coated ...
Standing seam metal roofs can have a lower pitch than asphalt shingle roofs because shingled roofs need a higher pitch to keep the wind from blowing up the shingles and potentially blowing them off in high winds. Standing seam metal roofs come in sheets up to or sometimes more than 30 feet (9.1 m) long and widths of 12, 14, 16 or 18 inches (300 ...
Components on a concrete masonry unit and brick cavity wall. A cavity wall is composed of two masonry walls separated by an air space. The outer wall is made of brick and faces the outside of the building structure. [6] The inner wall may be constructed of masonry units such as concrete block, structural clay, brick or reinforced concrete. [6]
Because the masonry veneer is non-structural, it must be tied back to the building structure to prevent movement under wind and earthquake loads. Brick ties are used for this purpose, and may take the form of corrugated metal straps nailed or screwed to the structural framing, or as wire extensions to horizontal joint reinforcement in a fully masonry veneer or cavity wall.
A load-bearing wall or bearing wall is a wall that is an active structural element of a building — that is, it bears the weight of the elements above said wall, resting upon it by conducting its weight to a foundation structure. [1] The materials most often used to construct load-bearing walls in large buildings are concrete, block, or brick.
A roof seamer is a portable roll forming machine that is used to install mechanically seamed structural standing-seam metal roof panels, as part of an overall metal construction building envelope system. The machine is small and portable to be handled by an operator on top of a roof.
The Home Insurance Building, completed in 1885, was the first to use skeleton frame construction, completely removing the load bearing function of its masonry cladding. In this case the iron columns are merely embedded in the walls, and their load carrying capacity appears to be secondary to the capacity of the masonry, particularly for wind loads.
Modern masonry still uses core and veneer walls; however, the core is now generally concrete block instead of rubble, and moisture barriers are included. [2] Often such walls end up as cavity walls by the inclusion of space between the external veneer and the core in order to provide for moisture and thermal control. [2]
Ads
related to: standing seam metal roof details to masonry cavity wall